-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Accelerating the Design Cycle : Moving from Discipline-Centric to Product-Centric Design
October 28, 2015 | Bob Potock, ZukenEstimated reading time: 2 minutes
Defining the characteristics of a new product, such as features, size, weight, and battery life, is the job of marketing. Realizing those design requirements is the responsibility of a multidisciplinary team consisting of product architects, hardware engineers, software engineers, mechanical engineers, packaging engineering, manufacturing engineers, purchasers, etc.
Today, the design process in most cases fans out from the requirements as defined by marketing into multiple independent design threads that converge at the prototype. There is usually no systematic method for these different disciplines to communicate their work to the other disciplines. This lack of communication often leads to conflicting design decisions, such as when an electrical engineer or purchaser selects a component without having any way of knowing that it interferes with the enclosure. Extra design turns are often needed to resolve these conflicts at the prototype stage.
This obstacle, and many others, can be overcome by a product-centric design process that enables all disciplines to work collaboratively during a new virtual prototyping and detailed design. During the architectural validation or virtual prototyping phase, each contributor can optimize the design from their own perspective with visibility and change notices from the others. The product optimization completed during the virtual prototyping process seamlessly transitions to detailed design, preserving all the critical decisions without data loss or re-entry. Product-centric design ensures that the evolving design meets the requirements of every discipline, reducing late stage design changes and enabling the product to be optimized to a higher degree than is possible with current methods.
Limitations of the Discipline-Centric Process
Looking back just a few years, developers of electronic products primarily competed based on the functionality of their design as determined by unique hardware and software features. Today, with much of the key functionality of electronic products having been commoditized in system-on-chips (SoCs) or application processors, electronics companies are now competing across a wide range of fronts: size, weight, style, battery life and features. The result is a greater need than ever for collaboration across the multiple disciplines that are responsible for providing this much broader range of attributes. More than ever before, a multidiscipline collaborative effort is required to deliver the best design that conforms to marketing requirements in the shortest possible time and at the lowest possible cost.
Yet the tools used to support product development and the process itself have not yet evolved to this new reality. In most cases, the marketing department draws up the requirements documents that then explode into multiple independent paths. The creative team styles the product. The procurement team looks at part cost. PCB designers design the boards one at a time. The manufacturing team decides where to make the product and what processes to use. Mechanical engineers design the enclosure. There may be some limited informal collaboration between disciplines using a spreadsheet or flowcharting tool prior to detailed design, but for the most part, each of these disciplines works independently with relatively little interaction with the others. This is a critical time where architectural decisions are being made with very little validation. In addition, this is generally a sidebar process whose results are not easy to integrate back into the separate design disciplines or into the detailed design; any communications errors can be disastrous.
To read this entire article, which appeared in the October 2015 issue of The PCB Design Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.