-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Working With Circuit Design Engineers
May 16, 2016 | Rick Hartley, RHartley EnterprisesEstimated reading time: 2 minutes
The PCB Design Magazine and PCBDesign007 receive a lot of feedback from reader surveys. One frequent comment from both PC board designers and circuit engineers involves the frustration of working with each other. Also, a question often asked is, “Are EEs taking over PC board design?”
In 1965, with a two-year college degree, I began life in electronics as an R&D technician. Over a few years I became a circuit designer (EE). Several years later I took another fork in the road, moving into PC board design and layout, making the assumption that, “Being an EE, surely I would be a better board designer than most.” Yeah, right!
I quickly learned that PC board design in the 1970s was less a matter of engineering and more a matter of art. Clearly there was science involved but that science was much more about mechanics and manufacturability of bare boards and assemblies than about electronics. People who understood the value of copper balance, pad-to-hole ratio, hole-to-board thickness ratio, how component placement impacted assembly and repair, knowledge of thermal transfer, etc. made better board designers than those with knowledge of only circuit theory. Those who had good analytical ability truly had the ultimate tool needed for board design. But knowledge of electronics, who cared? My education and background meant very little; I was learning everything from scratch.
Is this still true today? We will attempt to answer that question. Why did EE knowledge play such a small role back then? Circuits in those days, with the exception of the RF world, were so low in frequency that board traces had to be several yards long before they were a distributed length, capable of impacting performance. You could, by today’s standards, make every mistake under the sun, even in very large boards, and there was a good likelihood the circuit would work anyway. This was not always true, but it was true most of the time. My electronics background occasionally offered some advantage, but those occasions were rare.
The Seeds of Friction
From the 1950s to the late 1980s, our board design methods were severely bending the laws of physics, teetering on the edge of disaster! A lot of today’s grey-haired designers cut their teeth on the layouts of that period and got used to working without input from engineers. Many of those PC board designers were converted technicians, mechanical designers, and artists who learned to read a schematic and mastered artwork taping. EEs would often give their thoughts on what should be done, but you could listen to them or ignore them and the circuit would likely function either way. This era created some tension between board designers and their EE counterparts, mostly because they completely ignored each other’s ideas.
To read this entire article, which appeared in the April 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.