-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The State of the Electronic Design Automation Nation
July 6, 2016 | Abby Monaco, Intercept TechnologyEstimated reading time: 2 minutes
We are the automation nation. We are the high-speed demons, the low-frequency artists, the mixed-signal designers that make up the electronic design automation industry. We spend most of our working lives behind software, delivered to our fingertips with the promise of making things easier, faster, better, and getting us to our deadlines ever faster.
As a dedicated software product manager and a hands-on marketing director, I’ve seen trends in the efforts of software vendors to deliver automated portions of the design cycle. Some areas have been a great success, some areas have been a partial success, and some have just flopped all together.
There is an increase, year-over-year, in resources spent on the software vendors’ side to help end-users reach success on a per-project basis. There is a greater cry for freedom from designers who feel hampered by their very constrained, overly populated boards. Automation is a big part of the picture in these cases, and the growing complexity of PCB designs begs the question of where we begin to see diminishing returns on these efforts to make design “simpler” to accomplish. So often, a software tool promises a miraculous boost in productivity, only to leave users spending the same or more time correcting the automated processes that simply can’t complete an area of design that needs fine tuning from an experienced hand.
The Automatic Stackup Builder
As PCB design software has matured, more and more of the processes outside the actual design have become incorporated into the design cycle. One such error-prone area is the PCB designs and the actual substrate onto which they will be manufactured. Basic CAD systems tend to only define the number of routing layers, which is a gross simplification. A typical FR-4 board is layer upon layer of core and prepreg materials that have specific heights and requirements. Even the typical copper route has a height that should be taken into account. As designs are becoming denser and more complex, greater attention is given to how to design a stackup with the best materials and configuration that satisfy both cost and the design requirements.
To aid designers and engineers in this area of greater attention, there is a movement toward pre-layout, software driven, stackup builders which help predict the board characteristics more accurately, and with greater signal integrity, which reduces the need for as many design changes throughout the layout process. Engineers and designers can more closely examine a board stackup, with visual cues for dielectric (prepreg) layers in between metal layers, blind and buried vias, as well as trace widths and heights within the stack. They can also attempt to prevent unexpected manufacturing flaws because many of these stackup builders include the manufacturer’s specs or allow companies to build their own proven specs into the system for reliable re-use.
To read this entire article, which appeared in the May 2016 issue of The PCB Design Magazine, click here.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.