-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Concerned about ECHA’s Draft Guidance on Substances in Articles
September 29, 2016 | IPCEstimated reading time: Less than a minute
On September 22, 2016, IPC submitted comments to the European Chemicals Agency (ECHA) highlighting our concerns with the draft guidance on requirements for substances in articles, version 4.0.
In the comments, IPC highlights concerns that guidance is confusing and lengthy and suggests specific changes.
On July 27, 2016 ECHA published draft guidance on the application of REACH (Registration, Evaluation and Authorization of Chemicals) to substances in articles.
The court ruling directly affects the disclosures required of articles manufacturers. The new guidance addresses the EU Court of Justice ruling on September 10, 2015 on the that levels of substances of very high concern (SVHCs) must be calculate at the level of the “simple” article, not over the weight of the entire article as imported or as provided to the customer as stated in ECHA’s 2011 guidance.
A final guide is expected by the end of 2016 or early 2017 and the EU member states are planning a six- month enforcement pilot in early 2017.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.
North American EMS Industry Shipments Down 1.4% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.26.
North American PCB Industry Sales Up 12.8% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 0.98.
Industry Leaders Shape a Sustainable Future at 2025 IPC CEMAC Electronics Manufacturing Annual Conference
09/30/2025 | Global Electronics AssociationThe 2025 IPC CEMAC Electronics Manufacturing Annual Conference, co-hosted by the Global Electronics Association and the Shanghai Pudong Association for Quality and Technology, successfully concluded on September 26 in Shanghai.
Winners of Hand Soldering and Wire Harness Competitions Announced at NEPCON Vietnam 2025
09/24/2025 | Global Electronics AssociationIn conjunction with NEPCON Vietnam 2025, the Global Electronics Association hosted its popular Hand Soldering Competition on September 11–12, 2025, and the Northen regional round of the Wire Harness Competition on September 10, 2025, in Hanoi, Vietnam.