Standard of Excellence: Anticipating Customer Needs Early and Often
The Knowledge Base: At the Forefront of Electronics Manufacturing
Global Citizenship: Training the Next Generation of Talent
Engineered Material Systems Introduces New Dam and Fill Chip Encapsulants for Smart Card Assembly Applications
October 3, 2016 | Engineered Material SystemsEstimated reading time: Less than a minute
Engineered Material Systems is pleased to debut its 640-35 (dam) and 640-46 (fill) dam and fill UV cured chip encapsulants for chip-on-board smart card applications.
These new encapsulants are designed to protect wire bonds and reduce the stresses associated with thermal cycling. These materials are engineered to withstand circuit board reliability test criteria.
The dam and fill UV cured chip encapsulants cure rapidly when exposed to intense UV light centered at 365nm. They have been developed for encapsulating small chips in smart card applications where fast processing is required. 640-35 and 640-46 are the latest additions to Engineered Material Systems’ extensive line of electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonic applications.
About Engineered Material Systems
Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future.
Share on:
Suggested Items
Real Time with... IPC APEX EXPO 2025: Advanced Silicone Solutions from CHT
04/01/2025 | Real Time with...IPC APEX EXPOCHT team members introduce themselves and share their roles, with Kate Sincerbox focusing on technical service and Lisa Stutzman on inside sales. CHT specializes in silicone materials for encapsulation, adhesives, and coatings, serving the automotive and aerospace sectors.
Real Time with... IPC APEX EXPO 2025: Akrometrix—Creative Approaches to Measuring Thermal Warpage
03/31/2025 | Real Time with...IPC APEX EXPONeil Hubble discusses his research on measuring thermal warpage which focuses on challenges in testing small, thin samples. He introduces non-destructive testing methods that effectively measure without damaging components. Neil highlights the industry's growing interest in AI and outlines future technology goals, including improved resolution and automation to enhance production efficiency.
HARTING 3D-Circuits Leads 3D-MID Innovation: Transforming Consumer Electronics with Advanced Technology
03/27/2025 | PRNewswireThe consumer electronics industry is experiencing a remarkable transformation, propelled by rapid technological advancements and an increasing demand for compact, efficient, and multifunctional devices. Central to this evolution is 3D-MID (Three-Dimensional Mechatronic Integrated Devices) technology, which redefines design standards and drives innovation.
Real Time with... IPC APEX EXPO 2025: Koh Young—AI's Impact on the Electronics Industry
03/27/2025 | Real Time with...IPC APEX EXPOKoh Young's Joel Scutchfield discusses the role of AI in the electronics industry. He emphasizes data quality's importance for automation and the development of AI engines for specific tools. The conversation covers market trends in PCB and semiconductor technologies, trade negotiations, and the challenges of reshoring.
Real Time with... IPC APEX EXPO 2025: Kyzen—Enhancing PCB Cleaning Processes
03/26/2025 | Real Time with...IPC APEX EXPOJayson Moy of KYZEN discusses recent changes the company has made that are aimed at adding value to the industry. He highlights the significance of a reliable cleaning process for PCBs, which can prevent issues and boost efficiency.