-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAll About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Altium ActiveRoute Debuts at PCB West: Routes Under One Second Per Connection
October 20, 2016 | Judy Warner, I-Connect007Estimated reading time: 8 minutes

While at PCB West in Santa Clara in mid-September, I had the chance to sit down with Charles Pfeil of Altium and learn more about their exciting new tool, ActiveRoute, that was introduced and demonstrated in their booth during PCB West 2016. I also learned a bit about Pfeil, who is a living history lesson in PCB design.
Judy Warner: Charles, nice to see you again. You have been very busy here at PCB West, doing hourly demonstrations of your new product, ActiveRoute, in the Altium booth. Please tell us a little bit about what you're demonstrating here at the show.
Charles Pfeil: ActiveRoute is a tool that helps designers do their interactive routing. It's not an automatic router, although it has very high levels of automation. The intent is to provide the designer with a way to interactively route, following all the rules, constraints, and restrictions, under their control so they can tell the routing technology where to route, what layer to route, and then they will route it very, very quickly. It generally routes in less than one second per connection.
Warner: What is the standard routing time?
Pfeil: I've actually run some tests and some competitions, and for the best designers, when we're talking about a 100–200 nets, the average is about one minute, and I'd say for the average designer it is closer to three minutes.
Warner: Impressive. So this speeds things up dramatically, up but still gives designers the control? I know with autorouting, designers lose some of that control, which they don’t like.
Pfeil: Exactly. Autorouting has a stigma, right? And rightly so [laughs]. The problem with autorouting is that it will put in way too many vias, and a typical statement I hear is, “It will take me more time to clean it up than if I had just routed it by myself in the beginning.” Although the autorouter itself would be very fast, the time it takes to clean it up and the pain to clean it up isn't worth it, so they'd rather route it interactively. This tool works as an interactive tool. You can take a small number of nets or a large number of nets, route them, and you have tools for guiding where it's supposed to be routed. The intent is to make the designer more productive, not just put it into a route engine and have it work on it for a while, and then give you back the results.
Warner: It sounds like it will speed up the design, keep the control, but give you the advantage of some of the speed of an autorouter.
Pfeil: The speed and the quality are really important. Designers like me are OCD, but quality is something that isn't just, "It looks pretty." It's about being efficient, and it's about, "I want the least number of segments, I don't want extra meandering, and I want it to be routed in groups. I want things spaced out at times." This is what quality is about. Sometimes quality is misinterpreted as pretty, but it's really about having efficient routing that is easy to edit in the future. The OCD part of us will make things symmetrical and evenly spaced, even when it's not necessary, but that's the way designers are. If you give a designer a tool to help with routing, they won't use it if they have to spend a lot of time cleaning up. Cleaning up means, “It didn't do what I would've done.” That's the hard part: producing the results in which a designer would say, "Yeah, that's good. I'm going to go to the next step. I don't have to adjust all these things."
Warner: Will this tool be an add-on or will it be integrated into Altium Designer?
Pfeil: It's included with Altium Designer. It's part of the base product.
Warner: Is that starting right now or on the next release?
Pfeil: It's starting with Release 17.0 which will be out before the end of this year.
Warner: Do you think that having this feature may help you sell more licenses?
Pfeil: In the end, it's the bottom line, right? It's one of many things that are new in 17.0. We did a lot of work on making the user interface easier. Our Vault capability has been enhanced significantly. We're continuing to improve the tool in whatever ways we can. I've been focused on the routing side, and really trying to make a tool that designers will want to use and become more productive.
Warner: You've been giving demos every hour here. Tell us a little bit about the response from the designers that you've been talking with.
Page 1 of 2
Suggested Items
Nolan’s Notes: Moving Forward With Confidence
06/03/2025 | Nolan Johnson -- Column: Nolan's NotesWe’re currently enjoying a revitalized and dynamic EMS provider market with significant growth potential. Since December 2024, the book-to-bill has been extremely strong and growing. Starting with a ratio of 1.24 in December, book-to-bill has continued to accelerate to a 1.41 in April. Yet, there is a global economic restructuring taking place. To say that the back-and-forth with tariffs and trade deals makes for an uncertain market is an understatement. While we may be in a 90-day tariff pause among leading economic nations, the deadline is quickly approaching and that leaves many of you feeling unsettled about what to expect.
Mycronic High Flex Changes Division Name to PCB Assembly Solutions
05/20/2025 | MycronicMycronic AB, the leading Sweden-based electronics assembly solutions provider, announced that its division formerly known as High Flex will now operate under the name PCB Assembly Solutions.
SolderKing Achieves the Prestigious King’s Award for Enterprise in International Trade
05/06/2025 | SolderKingSolderKing Assembly Materials Ltd, a leading British manufacturer of high-performance soldering materials and consumables, has been honoured with a King’s Award for Enterprise, one of the UK’s most respected business honours.
Foxconn's Tiger Leap Combining Nature and Technology in Ecological Roof Garden
04/23/2025 | FoxconnHon Hai Technology Group, the world's largest technology manufacturing and service provider, has actively responded to the United Nations Sustainable Development Goals (SDGs).
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.