Global Sourcing Spotlight: How Global Sourcing Drives Innovation
One World, One Industry: IPC APEX EXPO 2025 Marks a Special Anniversary Year
Nolan’s Notes: Your Golden Ticket
Colonial Assembly and Design Earns IPC J-STD-001 and IPC-A-610 QML
January 19, 2017 | IPCEstimated reading time: 1 minute
IPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML), meeting Class 3 requirements, to Colonial Assembly and Design LLC, a wholly owned subsidiary of Zentech Manufacturing. Following an initial audit by IPC, Colonial Assembly and Design joins Zentech as one of the less than 10 U.S. trusted sources and suppliers meeting the stringent requirements of the Qualified Manufacturing Listing based on two of IPC's foremost standards: IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies; and IPC-A-610, Acceptability of Electronic Assemblies.
"I am very proud of the team at Colonial Assembly and Design (CA&D) and their accomplishment in attaining this certification. Knowing first-hand the length and comprehensiveness of the IPC Validation Services audit gives assurances to our customers that CA&D, can meet the highest workmanship standards in the industry," said Matt Turpin, president and CEO of Colonial Assembly and Design and Zentech Manufactruring Inc.
IPC's Validations Services QPL/QML Program was developed to promote supply chain verification. It also provides auditing and certification of electronics companies' products, and identifies processes which conform to IPC standards.
"Different from other audit programs, IPC's Validation Services Programs uniquely provides technical and in-depth assessments of products and processes in accordance with IPC standards," said Randy Cherry, IPC director of Validation Services. "We are pleased to recognize Colonial Assembly and Design, LLC for becoming a member of IPC's network of trusted QML suppliers."
For more information about IPC's Validation Services QPL/QML Program, click here or contact Randy Cherry at RandyCherry@ipc.org or +1 847-597-2806.
Share on:
Suggested Items
Würth Elektronik Now an Infineon ‘Preferred Partner’
03/13/2025 | Wurth Elektronik eiSosWürth Elektronik, one of the leading manufacturers of electronic and electromechanical components, is broadening its collaboration with semiconductor manufacturers.
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
03/13/2025 | John Watson -- Column: Elementary, Mr. WatsonAt the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
TI Introduces the World's Smallest MCU, Enabling Innovation in the Tiniest of Applications
03/12/2025 | PRNewswireTexas Instruments (TI) introduced the world's smallest MCU, expanding its comprehensive Arm® Cortex®-M0+ MSPM0 MCU portfolio. Measuring only 1.38mm2, about the size of a black pepper flake, the wafer chip-scale package (WCSP) for the MSPM0C1104 MCU enables designers to optimize board space in applications such as medical wearables and personal electronics, without compromising performance.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.