Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Connect the Dots: How to Avoid Five Common Causes of Board Failure
Bruce Mahler Discusses Ohmega’s Resistive Material Technology
May 7, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Bruce Mahler, vice president of Ohmega Technologies, sat down for an interview with me at DesignCon 2017. He discussed the company’s latest embedded resistive materials, as well as some of the drivers and challenges in that segment of the materials industry.
Andy Shaughnessy: Bruce, why don't you start off by giving us a brief background on Ohmega Technologies.
Bruce Mahler: Ohmega Technologies manufactures a thin-film resistive material, which is a nickel phosphorous alloy plated onto copper foil. That resistive foil, called OhmegaPly RCM, is laminated to a dielectric like regular copper foil and is then subtractively processed using standard PCB print and etch, to create resistive elements that are used either embedded within a multilayer printed circuit board or on the surface of a printed circuit board. We've been doing this for more than 40 years now, and we’re surprised with the variety of applications that use our technology. Every year it seems that there are new applications, new ways to use the resistive film. So, it's like a constant renewal of the technology in new opportunities, of new growth of the use of embedded resistors within printed circuit boards.
Shaughnessy: What are the primary markets that these boards wind up in?
Mahler: Good question. One of the primary markets is A&D (aerospace & defense) which we have been supplying our products to for decades. It’s mostly used in radar systems, control circuits, and in critical operating systems where absolute performance and reliability are essential. The resistive material cannot be affected by temperature extremes, high G-force, vibration, magnetic or cosmic radiation and those kinds of things.
The other big market is sensor technologies. We supply our product to the MEMS microphone manufacturers. If you have a cellphone, you probably have OhmegaPly within that cell phone. We're used in the MEMS microphone of cell phones as part of an RC filter to improve the sound fidelity of the microphones; we've been doing that for many years. There’s also a growing area of applications and use in sensor technologies: not just MEMS microphones but other MEMS devices and technologies.
The third area of use where we see growing opportunities are in heater designs. Heater elements are used for things like semi-active laser activation of smart munitions or embedded resistors as heater elements in a printed circuit board to maintain surface components at optimum temperatures for optimum operation, whether that's in deep-space applications or even down to earth in medical diagnostic type applications. OhmegaPly has also been used as an internal heater in burn-in boards to allow for IC burn-in without the need of a temperature chamber.
To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
08/27/2025 | Michael Carano -- Column: Trouble in Your TankTo quote the comedian Stephen Wright, “If at first you don’t succeed, then skydiving is not for you.” That can be the battle cry when you find that only small-diameter vias are exhibiting voids. Why are small holes more prone to voids than larger vias when processed through electroless copper? There are several reasons.
The Government Circuit: Navigating New Trade Headwinds and New Partnerships
08/25/2025 | Chris Mitchell -- Column: The Government CircuitAs global trade winds continue to howl, the electronics manufacturing industry finds itself at a critical juncture. After months of warnings, the U.S. Government has implemented a broad array of tariff increases, with fresh duties hitting copper-based products, semiconductors, and imports from many nations. On the positive side, tentative trade agreements with Europe, China, Japan, and other nations are providing at least some clarity and counterbalance.