Connect the Dots: Proactive Controlled Impedance
Beyond Design: Radiation and Interference Coupling
Elementary, Mr. Watson: Design Data Packages—Circle of Concern or Circle of Influence?
Akrometrix to Launch Ultra-Fast Tabletop Warpage Metrology System at productronica
October 16, 2017 | Akrometrix LLCEstimated reading time: 1 minute
Akrometrix LLC will display its newest warpage metrology system in Hall A3 Stand 102/1 at productronica 2017, scheduled to take place November 14–17, 2017 at the Messe München in Munich, Germany. The new Tabletop Shadow Moiré (TTSM) system offers all of the software features of Akrometrix's thermal warpage metrology systems in a room temperature unit which provides full field-of-view measurement in less than two seconds.
Akrometrix is not only the industry leader in providing thermal warpage, but has optional modules for both DIC strain/CTE measurements and DFP for discontinuous surfaces. Utilizing a novel combination of both top and bottom heaters with shadow moiré, Akrometrix is providing temperature uniformity previously unattainable in the industry on a flexible/configurable platform.
The TTSM responds to the industry’s demand for an ultra-fast tabletop warpage metrology system. It enables customers to measure warpage of substrates up to 300mm x 310mm (a 300mm wafer or two JEDEC trays) with the entire measurement taking less than two seconds. Whether individual parts or a JEDEC tray of multiple parts, the TTSM provides an ultra-fast and highly accurate measurement at room temperature that is suited for tabletop use.
About Akrometrix LLC
Akrometrix is the leader in thermal warpage and strain metrology for the front-end/back-end wafer, back-end packaging/assembly, panel and the PCB/component markets. The company provides both capital equipment and test services to measure warpage and strain in temperatures from -50°C to 300°C on virtually any substrate up to 600mm x 600mm, regardless of shape. Located in Atlanta, Georgia, Akrometrix has been serving customers worldwide for more than 20 years based on technology developed at Georgia Tech. For more information, click here.
Share on:
Suggested Items
INEMI Interim Report: Interconnection Modeling and Simulation Results for Low-Temp Materials in First-Level Interconnect
05/30/2025 | iNEMIOne of the greatest challenges of integrating different types of silicon, memory, and other extended processing units (XPUs) in a single package is in attaching these various types of chips in a reliable way.
Laird Thermal Systems Unveils New Identity
05/05/2025 | Laird Thermal SystemsLaird Thermal Systems, a global leader in active thermal management solutions with more than 60 years of application expertise, today announced its rebrand to Tark Thermal Solutions.
INEMI Call-for-Participation Webinar: BiSn-Based Low-Temperature Soldering Process and Reliability Project Phase 3b
04/28/2025 | iNEMIIn 2015, INEMI initiated the BiSn-Based Low-Temperature Soldering Process and Reliability Project to assess the feasibility of using low-temperature solders (LTS) in the SnBi system to address various technological, economic and ecological drivers for assembly of consumer computer electronic board products.
NUS Physicists Discover a Copper-free High-temperature Superconducting Oxide
03/28/2025 | PRNewswireProfessor Ariando and Dr Stephen Lin Er Chow from the National University of Singapore (NUS) Department of Physics have designed and synthesised a groundbreaking new material—a copper-free superconducting oxide—capable of superconducting at approximately 40 Kelvin (K), or about minus 233 degrees Celsius (deg C), under ambient pressure.
Indium to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
03/26/2025 | Indium CorporationAs a global materials supplier and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation® is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 26-28, in Shanghai, China.