Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Connect the Dots: How to Avoid Five Common Causes of Board Failure
Bay Area Circuits Updates InstantDFM Tool
November 29, 2017 | Andy Shaughnessy, PCB Design007Estimated reading time: 4 minutes
Bay Area Circuits is on a quest to help PCB designers and design engineers. For the past few years, the company has been holding facility tours and open house events to help designers understand more about the fabrication process. Now, Bay Area Circuits has upgraded its free design tool, InstantDFM.com, which allows customers and non-customers alike to check manufacturability and request pricing of their jobs.
At PCB West, I spoke with President Stephen Garcia and COO Brian Paper about the new tool update, and some of the other services they offer for PCB designers.
Andy Shaughnessy: I'm here at PCB West with Stephen Garcia and Brian Paper from Bay Area Circuits. Stephen, why don't you start off telling us a little bit about the company and then about your latest tool upgrade?
Stephen Garcia: Our company was founded in 1975 but we’re now entering the fourth year since we relocated to a larger facility in Fremont, California. Being located in the heart of Silicon Valley surrounded by product development companies, our real focus has become quick-turn prototype manufacturing. Since the move, we’ve made significant investments in technology to not only keep pace with customer requirements, but also to reduce processing time and speed delivery. Most recently, we took delivery of a second Excellon Intelli-Drill system, which really strengthens our drilling capacity and capability.
Shaughnessy: So, tell me a little bit about this DFM tool upgrade. It's been out for a little while.
Garcia: InstantDFM.com launched in 2014, and allows users to upload their PCB design data and receive a free design for manufacturability report. Of all the free design tools and educational resources we offer on our website, InstantDFM is by far the most popular. That said, some users found that the DFM feedback provided was too cryptic; the information made sense to us, the manufacturer, but wasn’t always understood by the user. So, we set out to improve the feedback mechanism and just prior to PCB West, we released the first major update to the tool, providing easier-to-understand, actionable design intelligence.
Additionally, we’ve added functionality that displays for the user how their design lines up with our standard and advanced capabilities. This becomes helpful during the design process because users are now aware of the capabilities needed to fabricate their design, providing them the opportunity to make cost-saving design adjustments wherever possible. We’ve also added the ability for the user to view each layer of the design, which can really help identify any design software-to-manufacturing software translation issues.
Ultimately, we’re trying to put more information in the hands of the designer, and the fact that InstantDFM is free and completely automated means that users aren’t beholden to normal business hours to receive a design for manufacturability report.
Shaughnessy: It's nice that people who aren't necessarily customers get to use it.
Brian Paper: Providing free design tools and resources to the designer community has become part of our company’s DNA. As a manufacturer, we have so much pent up knowledge that it seems unfair to keep it to ourselves. We do our best to share this knowledge by distributing design tools, white papers, blog posts, and, by offering frequent facility tours that give designers a chance to better understand the fabrication process. Ultimately, our hope is that these resources help us establish ourselves as industry experts and attract a growing customer base.
Shaughnessy: That's a great idea. A good facility tour helps establish you all as experts in their minds.
Paper: The company has been in operation for more than 40 years so we’ve obviously acquired a lot of PCB manufacturing expertise. But, we’ve also found that many experienced PCB designers have never taken the time to tour a manufacturing facility. By offering tours to designers, we’re able to better explain the fabrication process and provide them with valuable design feedback and cost-saving advice. We always find tours to be a win-win scenario for both parties.
Garcia: Tours are also helpful in terms of educating customers about recent equipment investments and what those additions mean to them in terms of technology and capability improvements. After all, customer demand really drives our technology investments. And as a quick-turn manufacturer, it’s really important for us to have redundancy throughout the process. As you might imagine, building a PCB in 24 hours doesn’t leave much room for equipment downtime.
And, based on customer deadlines, these types of turn times are not abnormal. Just last week, a customer contacted us on a Monday and said they needed a fully assembled board in hand by Friday. They literally sent us a scan of a napkin, and in three days we handled the design, PCB fabrication and assembly, delivering the project to them by the Friday deadline. So that’s the world we now live in and we’re going to continue to support that speed of innovation.
Shaughnessy: Sounds good. Thanks for your time today.
Garcia: Thank you.
Sponsored Links:
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
ASM Technologies Limited signs MoU with the Guidance, Government of Tamilnadu to Expand Design-Led Manufacturing capabilities for ESDM
09/15/2025 | ASM TechnologiesASM Technologies Limited, a pioneer in Design- Led Manufacturing in the semiconductor and automotive industries, announced signing of Memorandum of Understanding (MoU) with the Guidance, Government of Tamilnadu whereby it will invest Rs. 250 crores in the state to expand its ESDM related Design-Led Manufacturing and precision engineering capacity. ASM Technologies will acquire 5 acres of land from the Government of Tamilnadu to set up a state-of-the-art design facility in Tamil Nadu's growing technology manufacturing ecosystem, providing a strong strategic advantage and long-term benefits for ASM.
Variosystems Strengthens North American Presence with Southlake Relaunch 2025
09/15/2025 | VariosystemsVariosystems celebrated the relaunch of its U.S. facility in Southlake, Texas. After months of redesign and reorganization, the opening marked more than just the return to a modernized production site—it was a moment to reconnect with our teams, partners, and the local community.
Deca, Silicon Storage Technology Announce Strategic Collaboration to Enable NVM Chiplet Solutions
09/11/2025 | Microchip Technology Inc.As traditional monolithic chip designs grow in complexity and increase in cost, the interest and adoption of chiplet technology in the semiconductor industry also increases.
I-Connect007 Launches New Podcast Series on Ultra High Density Interconnect (UHDI)
09/10/2025 | I-Connect007I-Connect007 is excited to announce the debut of its latest podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI). The series kicks off with Episode One, “Ultra HDI: What does it mean to people? Why would they want it?” Host Nolan Johnson is joined by guest expert John Johnson, Director of Quality and Advanced Technology at American Standard Circuits (ASC).
Global Citizenship: Together for a Perfect PCB Solution
09/10/2025 | Tom Yang -- Column: Global CitizenshipIf there’s one thing we’ve learned in the past few decades of electronics evolution, it’s that no region has a monopoly on excellence. Whether it’s materials science breakthroughs in Europe, manufacturing efficiencies in China, or design innovations in Silicon Valley, the PCB industry thrives on collaboration.