Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Fresh PCB Concepts: PCB Plating Process Overview
Ucamco Upgrades Gerber Format Specification Manual
December 6, 2017 | UcamcoEstimated reading time: Less than a minute
Ucamco has released version 2017.11 of the Gerber format specification and version 2017.10 of the proposal to include fabrication documentation in the Gerber format. Both documents are available on Ucamco’s downloads page. To view these documents, click here.
About Ucamco
Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).
Share on:
Suggested Items
Solar Powered Aircraft Achieves New Stratospheric Success
12/26/2024 | BAE SystemsA British-led team of engineers has taken a leap forward in the race to harness the stratosphere for earth observation and communications, completing a new series of test flights of BAE Systems’ High Altitude Pseudo Satellite (HAPS) Uncrewed Aerial System (UAS), PHASA-35®, in quick succession.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
Saab Receives Giraffe 4A Radar Order for the U.S. Air Forces in Europe
12/17/2024 | SaabSaab has received an order from BAE Systems in support of the U.S. Air Forces in Europe for multiple Giraffe 4A radar systems. The contract value is approximately $48M (525 MSEK). Deliveries will start in 2027.
INVISIO Secures SEK 115 Million Order for Intercom and Dismounted Soldier Systems
12/16/2024 | INVISIOINVISIO has received a significant order from an existing European customer for its Intercom and Dismounted Soldier systems. Deliveries are set to commence immediately and are expected to be completed by Q1 2025.
L3Harris Plays Key Role in Successful Missile Defense Test
12/16/2024 | L3Harris TechnologiesL3Harris Technologies provided the Medium Range Ballistic Missile (MRBM) target and propulsion for the Standard Missile-3 Block IIA (SM-3 Blk IIA) used in the Missile Defense Agency’s (MDA) latest successful test aimed at strengthening U.S. missile defense.