Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."

Klaus Koziol - atg

Suggested Items

Sarla Aviation Scales Urban Air Mobility with Siemens Xcelerator

08/07/2026 | Siemens
Siemens announced that Sarla Aviation is using the Siemens Xcelerator portfolio of industry software to accelerate the development of its next-generation electric vertical take-off and landing (eVTOL) aircraft for urban air mobility.

CELUS, Variscite and NXP Enable AI-Driven Embedded Design

08/06/2026 | BUSINESS WIRE
CELUS, the AI-driven electronics design automation provider, announced a strategic partnership with Variscite, a leading provider in the System on Module (SoM) industry.

Designing for the Human Eye: Three Lessons Every PCB Designer Should Know About LED Displays

08/06/2026 | Stephen V. Chavez, Siemens EDA and PCEA
A display is one of the few electronic subsystems where PCB design decisions become visible to the end user. A few milliohms of resistance, a slight impedance discontinuity, or a few degrees of temperature difference may never matter elsewhere in the product. In an LED display, however, those same design decisions can become a visible defect. Behold the power of the human eye. Over the years, I've reviewed hundreds of PCB layouts spanning everything from industrial controls and aerospace electronics to medical devices and high-speed computing systems. Every design presents its own unique challenges, but display electronics have always stood apart.

3 Key Takeaways: Design for Test Starts Long Before the First Test

08/05/2026 | I-Connect007 Editorial Team
Design for test has traditionally been viewed as the last checkpoint before a product enters production. Bert Horner's The Printed Circuit Assembler's Guide to... Design for Test challenges that thinking. In his book, he argues that testability should influence every stage of PCB and CCA development, from the first schematic through layout, manufacturing, inspection, and long-term product support. The result is a practical guide that connects engineering decisions with measurable manufacturing outcomes.

Remtec to Participate at PCB West 2026, Showcasing Advanced Ceramic PCB Technologies for High-Reliability Electronics

08/04/2026 | Remtec
Remtec President & CEO Brian Buyea invites Engineers, Designers and OEMs to discover the future of advanced ceramic circuit solutions.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in