Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
Zymet UA-3307-B Edgebond Adhesive for Automotive Board Level Reliability
January 11, 2018 | ZymetEstimated reading time: Less than a minute
At APEX EXPO 2018, Zymet will be featuring its recently introduced edgebond adhesive, UA-3307-B, for enhancing board level reliability in automotive and other harsh environment applications. BGA’s and WLCSP’s whose corners and edges are bonded with this adhesive have passed more than 2000 cycles of -40°C to 125°C thermal cycling without failure. Large WLCSP’s, exceeding 8-mm in size, have passed more than 1500 cycles.
The benefits of using Zymet’s edgebond adhesive, rather than introducing an underfill under the component, are significant. Board preheat and dwell time are not needed for underfill flow. There is no risk of underfill voids caused by flux residues impeding flow. And, there is no risk of underfill/flux-residue chemical incompatibility affecting underfill cure. Use of Zymet’s UA-3307-B is simple, repeatable, and reliable.
For more information, visit Zymet at APEX Expo 2018, at the San Diego Convention Center, February 27 – March 1, 2018, Booth 2246. Or, email the company at info@zymet.com. Zymet is a global supplier of adhesives and encapsulants, focused on the development and manufacture of enabling materials for the electronics industry.
Share on:
Suggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.