The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
Decisions of Aspocomp's Annual General Meeting 2018
March 16, 2018 | AspocompEstimated reading time: 3 minutes
The Annual General Meeting of Aspocomp Group Plc held on March 16, 2018 adopted the annual accounts and the consolidated annual accounts for the financial period 2017 and granted the members of the Board of Directors and the CEO discharge from liability.
The Annual General Meeting decided to pay a dividend of EUR 0.07 per share, as proposed by the Board of Directors. The dividend will be paid to shareholders registered in the company's register of shareholders maintained by Euroclear Finland Ltd on the record date of the dividend distribution, March 20, 2018. The dividend will be paid on March 28, 2018.
The Annual General Meeting decided to set the number of Board members at five (5) and re-elected the current members of the Board Ms. Päivi Marttila, Ms. Kaarina Muurinen, Ms. Julianna Borsos, Mr. Matti Lahdenperä, and Mr. Juha Putkiranta, for a term of office ending at the closing of the following Annual General Meeting. The Annual General Meeting re-elected PricewaterhouseCoopers Oy, Authorized Public Accountants, as the company's auditor for a term of office ending at the closing of the following Annual General Meeting. PricewaterhouseCoopers Oy has notified that Mr. Jouko Malinen, Authorized Public Accountant, will act as its principal auditor.
The Annual General Meeting decided that the chairman of the Board of Directors will be paid EUR 30,000, the vice chairman of the Board of Directors be paid EUR 20,000 and the other members will be paid EUR 15,000 each in remuneration for their term of office. The Annual General Meeting further decided that EUR 1,000 will be paid as remuneration per meeting to the chairman and that the other members be paid EUR 500 per meeting of the Board and its committees. The members of the Board of Directors will further be reimbursed for reasonable travel costs. The auditor’s fees will be paid according to the auditor’s invoice.
The Annual General Meeting decided to authorize the Board of Directors, in one or more installments, to decide on the issuance of shares and the issuance of options and other special rights entitling to shares referred to in Chapter 10 Section 1 of the Companies Act as follows:
The number of shares to be issued based on the authorization may in total amount to a maximum of 666,650 shares.
The Board of Directors decides on all the terms and conditions of the issuances of shares and of options and other special rights entitling to shares. The authorization concerns both the issuance of new shares as well as own shares possibly held by the company. The issuance of shares and of options and other special rights entitling to shares referred to in Chapter 10 Section 1 of the Companies Act may be carried out in deviation from the shareholders’ pre-emptive rights (directed issue).
The authorization cancels the authorization given by the General Meeting on March 23, 2017 to decide on the issuance of shares as well as the issuance of special rights entitling to shares. The authorization is valid until June 30, 2019.
The minutes of the Annual General Meeting are available on the company’s website at www.aspocomp.com/agm starting from March 30, 2018 at the latest.
The Board Of Directors' Organization Meeting
In its organization meeting held after the Annual General Meeting, the Board of Directors of Aspocomp Group Plc re-elected Ms. Päivi Marttila as Chairman of the Board and Ms. Kaarina Muurinen as Vice Chairman.
The Board decided to establish an Audit Committee. Ms. Kaarina Muurinen was elected as Chairman and Ms. Julianna Borsos and Mr. Matti Lahdenperä as members of the Audit Committee.
The Board of Directors has at its meeting evaluated the independence of the Board members in compliance with the recommendations of the Finnish Corporate Governance Code. It is the view of the Board of Directors that all Board members, other than Ms. Julianna Borsos, are independent of the company's major shareholders. The Board of Directors has also assessed that all the Board members are independent of the company.
About Aspocomp – a service company specializing in PCB technologies
A printed circuit board (PCB) is used for electrical interconnection and as a component assembly platform in electronic devices. Aspocomp provides PCB technology design, testing and logistics services over the entire lifecycle of a product. The company’s own production and extensive international partner network guarantee cost-effectiveness and reliable deliveries.
Aspocomp’s customers are companies that design and manufacture telecommunication systems and equipment, automotive and industrial electronics, and systems for testing semiconductor components for security technology. The company has customers around the world and most of its net sales are generated by exports.
Aspocomp is headquartered in Espoo and its plant is in Oulu, one of Finland’s major technology hubs. For more information, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Rethinking Stackup, Materials, and Tolerances in Modern Designs
05/14/2026 | Kristin Moyer, Global Electronics AssociationThe simple rectangular rigid PCB is becoming increasingly infrequent. This reality necessitates designing with concepts well outside traditional rigid PCB methodologies. For example, the designer of wearable electronics may need to implement conductive fibers integrated into the textile material. Heads-up displays, like those in VR/AR headsets and glasses, require transparent circuitry etched into the display glass. The process of designing without a rule book usually starts with something other than the traditional board design process.
Knocking Down the Bone Pile: Precision Milling of Underfilled SMT Components
05/13/2026 | Nash Bell -- Column: Knocking Down the Bone PileUnderfill is a polymeric material used to fill the gap between a printed circuit board and the underside of surface-mount area-array packages such as BGA, QFP, and QFN devices, thereby surrounding and protecting the solder interconnections. This material increases the component's reliability when subjected to mechanical impacts and shocks by distributing forces.
AI Demand Drives PCB Material Market Growth
05/08/2026 | TPCAAs AI computing continues to drive a comprehensive upgrade in hardware specifications, the global printed circuit board industry is undergoing a profound structural transformation.
Connect the Dots: Designing for the Future of Manufacturing Reality—Surface Finish
05/07/2026 | Matt Stevenson -- Column: Connect the DotsWhen designing the complex boards that many electronic devices require to operate, designers should consider manufacturability at every step. This is my last article focused on designing for the always-evolving manufacturing reality. Choosing the right surface finish has always been important. If you are creating intricate designs with a wide variety of components, like for an ultra-high density interconnect (UHDI) board, surface finish is a critical last step.
PCBAA, AAM Take on the Fight to Rebuild U.S. Manufacturing in New Documentary
05/05/2026 | Marcy LaRont, I-Connect007Throughout most of the 20th century, manufacturing was central to the American Dream of providing stable jobs and pathways to upward mobility. Today, more than 80% of global electronics manufacturing capacity resides in China and greater Asia, raising serious concerns about supply chain resilience and national security.