It’s Only Common Sense: Selling to Today's Generation of Buyers
Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
Orange Co. Designers Council Meeting June 28 in Irvine
June 13, 2018 | Scott McCurdy, Freedom CAD ServicesEstimated reading time: 2 minutes
For the monthly Lunch ‘n Learn meeting on June 28, the Orange County chapter of the IPC Designers Council features two guest speakers with informative presentations on multiboard design and material solutions to address skew.
Presentation 1: Addressing the Challenges of Multiboard Design: Taking the “Big Picture” Approach to System Design
Speaker: Chris Carlson, CID, Senior Field Applications Engineer with Altium
As technology becomes more complex and miniaturized, the need for more complex multiboard systems arise. Clear lines between layout, mechanical and performance concerns begin to blur, which creates the need for PCB designers to take a more holistic view of the system.
In this presentation, Chris Carlson will discuss the unique and varied challenges that arise when doing multiboard system designs. He will review the considerations relative to partitioning the PCB, connection management, connector libraries and planning the layout. He will also discuss mechanical features, managing signals, thermal management, reliability, and power and signal integrity. Finally, Carlson will show how to ensure good mechanical fit by making the most of your 3D CAD functionality.
Presentation 2: Design and Manufacturing Developments to Lower Insertion Loss and Digital Pair Skew: What a Designer Needs to Know About Meeting 56Gb/S Speed Challenges
Speaker: Norm Berry, Director of Laminate and OEM Marketing, Insulectro
As frequency increases, differential pair skew and insertion loss become critical considerations for PCB design and manufacture. Add the ever-increasing complexity of reliable designs, while balancing value/cost performance, and the manufacturing options become more challenging. The designer needs to be aware of advancements in the base material manufacture and the options available to the fabricator.
Whether we are concerned with the demands of HDI designs with stacked, laser-drilled microvias or insertion loss on high-speed digital backplanes, the base material composite, with low-profile copper and a mechanically spread glass reinforcement, has a direct impact. Backplanes operating at 56Gb/s require the integration all these factors and the newly developed manufacturing technologies.
The cost is $10 at the door. Altium is sponsoring the event by helping with the cost of the lunches.
There are two ways to RSVP:
- Click here to RSVP online
- Email your RSVP to Scott McCurdy
Please RSVP no later than noon on Wednesday, June 27. Reserve a spot on your calendar on Thursday, June 28 from 11:30 am to 1:30 pm for this educational Lunch ‘n Learn event.
Location
Harvard Athletic Park (The multi-purpose room is at the SOUTH end of the athletic fields)
14701 Harvard Ave.
Irvine, California
92606
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.