-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueCreating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Milwaukee Electronics Strengthens Tecate Facility
July 20, 2018 | Milwaukee ElectronicsEstimated reading time: Less than a minute
EMS firm Milwaukee Electronics continues to upgrade the capabilities and capacity of its Tecate, Mexico facility. The facility recently completed its ISO 9001:2015 audit and is now registered to the latest revision of that standard.
The facility has also continued to add automated assembly capacity. It has purchased an Autosplice Multisert Xs machine capable of inserting knife terminals for automotive fuse boxes. Manual assembly processes do not provide insertion accuracy repeatability that is good enough to support automotive industry specifications. The new equipment remedies that challenge. Machine features include:
- Insertion rates up to 3 per second on 0.2” (5.08 mm) pitch
- 18” x 18” insertion area (457 mm x 457 mm)
- Accuracy of ±0.0001”
- Vision system for PCB error correction
- Ability to add an additional placement head
Suggested Items
Milwaukee Electronics Portland Facility Passes ISO 13485:2016, ISO 9001:2015 Audits
11/28/2018 | Milwaukee ElectronicsMilwaukee Electronics' Portland facility has completed its audit for the transition to ISO 13485:2016 and re-certification to ISO 9001:2015.
Milwaukee Electronics Names Gary DeGrave Corporate Materials Director
07/16/2018 | Milwaukee ElectronicsGary DeGrave Jr. has joined EMS firm Milwaukee Electronics as corporate materials director.
Milwaukee Electronics Reorganizes Engineering Team
12/29/2017 | Milwaukee ElectronicsEMS firm Milwaukee Electronics has consolidated its engineering resources into a single department to make it easier for customers to conveniently access the right mix of resources for their projects.
Milwaukee Electronics Standardizes on Panasonic Platform for all SMT Lines
12/28/2017 | Milwaukee ElectronicsMilwaukee Electronics has standardized on Panasonic equipment platform for all of its three facilities.
Milwaukee Electronics' Portland Facility Receives ISO 9001:2015 Certification
11/27/2017 | Milwaukee ElectronicsMilwaukee Electronics' Portland, Oregon, facility has become one of the first companies in the EMS industry to be certified to ISO 9001:2015.