Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
The Shaughnessy Report: Breaking Down the Language Barrier
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
PCB Designers: Perfect Your Data Package with New eBook from Prototron
September 27, 2018 | I-Connect007Estimated reading time: 1 minute
For PCB designers, producing a comprehensive data package is crucial. If even one important file is missing or output incorrectly, it can cause major delays and potentially ruin the experience for every stakeholder. Learn how to perfect your data package with I-Connect007’s most recent title: The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package.
The Printed Circuit Designer’s Guide to… is an ongoing book series specifically dedicated to educating PCB designers and serves as a valuable resource for people seeking the most relevant design information available.
Written by Prototron Circuits’ Mark Thompson, an industry veteran with over 38 years of experience, this book describes exactly what a PCB fabricator requires in a design output package and explains the consequences of providing incomplete or inaccurate information. Mark also highlights the importance of earlier communication between the designer and fabricator.
Douglas Brooks, Ph.D., says, “Mark Thompson does an outstanding job detailing what needs to be included in the handoff between the board designer and fabricator. Understanding and following his advice will lead to a smooth transition between these two functions. His new book should be required reading for every designer.”
Readers will learn effective ways to eliminate discrepancies and errors, ensure project success, and reduce costs and wasted time.
Download your free copy today! You can also view other titles in our full library.
We hope you enjoy The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package.
For more information, contact:
Barb Hockaday
I-Connect007 eBooks
barb@iconnect007.com
+1-916-365-1727 (GMT-8)
Share on:
Suggested Items
Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
03/13/2025 | John Watson -- Column: Elementary, Mr. WatsonAt the 2020 Tokyo Summer Olympics, the U.S. men's 4x100-meter relay team had high hopes of winning a medal. The team comprised some of the fastest sprinters in the world, but something went wrong. In a relay, four runners must smoothly pass their baton to the next runner inside a zone on the track. If a runner drops the baton or it’s passed outside the zone, the team risks disqualification. The U.S. team’s pass between the second and third runner was messy, slowing them down. By the time the last runner received the baton, the team had lost too much time. They finished sixth in their heat and didn’t qualify for the final.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.
The Shaughnessy Report: Breaking Down the Language Barrier
03/11/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportAccording to Ethnologue’s 2024 update, there are currently 7,164 living languages being spoken today. It makes you wonder: Do they count PCB design as a language? PCB fabrication? Assembly?
Design007 Magazine March 2025: Learning to Speak 'Fab'
03/10/2025 | I-Connect007 Editorial TeamOur expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders in the March 2025 issue of Design007 Magazine. But as you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/07/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week. My must-reads include articles and news items on global trends and challenges, groundbreaking technology, the hunt for the elusive young PCB designers, and some personnel changes. We also have a great column on the value of following up and keeping promises. We’re all guilty of “dropping the ball” from time to time, aren’t we?