Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
New Designers Council Column: The Digital Layout
December 4, 2018 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
The IPC Designers Council is launching a new column in Design007 Magazine: “The Digital Layout.” I recently asked two IPC Designers Council (DC) Executive Board members, Mike Creeden and Stephen Chavez, to discuss the content and objective of their new column, and how this all ties in with the DC.
Andy Shaughnessy: Mike, what can we expect in this new Designers Council column?
Mike Creeden: I’ll give an overview of PCB design layout and some of the transitions that we're experiencing. Our new column is called “The Digital Layout.” The design profession has evolved over the years, and to meet today’s challenges, all designers need to view layout from three concurrent perspectives. The first is layout solvability, which entails mastering the CAD tool and solving the layout. With today’s technologies, using HDI is becoming commonplace and is often a complicated puzzle to solve. Second, there’s the performance of the circuit; EMI, signal integrity, power integrity, and thermal performance must be considered. Third, designers should use DFX in all areas of manufacturing.
In our industry, there are a significant number of EEs being asked to take on the layout portion. Many EEs and designers, especially those who work remotely, may not be aware of the IPC Designers Council and what it can do for them.
Our hope is to make people aware of the resources and events that the IPC Designers Council provides. IPC is not a “them”; it's an “us.” IPC is a reflection of the industry. When I volunteer on the committee meetings, I see participants from across the industry, the country, and the world who are all contributing to the standards.
Shaughnessy: Standards are always a good topic. Pro or con, it’s a great conversation.
Creeden: Sure. I've heard a lot of people say recently, "Why do we need standards? Just build it!" What you need to realize is that we ask our supply chain to build to standards. We legally hold them accountable to produce a Class 2 or Class 3 board, and then we design to the requirement of an IPC Class with a producibility level. The producibility level affects yields and profit margins, so these are very important aspects to the standards.
This month you’re covering data. What I would say about data is that a manufacturer must work with the data designers supply. Designers should understand the manufacturing process and how to support the manufacturers while ensuring that circuits will to perform properly.
There’s a lot of activity going on with IPC. There’s a new platform called “The IPC Edge” that is essentially an online learning platform. Steph and I are both certified IPC instructors for the CID and CID+ classes. We are also members of the executive board for the Designers Council. There are also local chapters spread across the globe where designers can participate.
To read this entire article, which appeared in the October 2018 issue of Design007 Magazine, click here.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Reflections and Priorities: An Update to I-Connect007 Readers
06/24/2025 | Marcy LaRont, I-Connect007The electronics and manufacturing industry is evolving rapidly—with new technologies, deeper global connections, and a growing drive toward sustainability. To reflect these changes and our place in this dynamic space, we’re refreshing our brand.
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
06/24/2025 | Mike Konrad -- Column: The Knowledge BaseAs the electronics manufacturing industry races to meet rising global demand and technological complexity, the need for a highly skilled, future-ready workforce has never been greater. At the forefront of addressing this challenge is The Electronics Manufacturing & Assembly Collaborative (EMAC)—a national initiative dedicated to strengthening the talent pipeline through strategic collaboration with SMTA, education, and government stakeholders.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.