Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
IPC Subcommittee to Host Open Forum on Weak Microvia Interface during IPC APEX EXPO
December 10, 2018 | IPCEstimated reading time: Less than a minute
The IPC V-TSL-MVIA Weak Interface Microvia Failures Technology Solutions Subcommittee, formed this year, is working to identify the risks, causes, and mitigation of failures due to a weak interface between the plated copper at the bottom of a microvia and the underlying copper surface. The activity grew out of the development of IPC-WP-023, a white paper that cast a light on how a weak microvia interface is a hidden reliability threat.
The subcommittee will hold an open forum for industry to learn about its activities as well as its planned path forward. Attendees will be invited to share their own issues regarding weak microvia interfaces and will learn how to participate on the subcommittee.
IPC Weak Microvia Interface Open Forum
Wednesday, January 30, 2019
10:15 AM to 12:00 PM
San Diego Convention Center
Room 6
Order IPC WP-023, IPC Technology Solutions White Paper on Performance-Based Printed Board OEM Acceptance via Chain Continuity Reflow Test: The Hidden Reliability Threat – Weak Microvia Interface from the IPC bookstore.
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.