Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
Target Condition: Designing vs. Inventing
Dana on Data: The Missing AI-NPI Link
Mentor White Paper: Lean NPI at Optimum Design Associates, Part 3
March 13, 2019 | Mentor, a Siemens businessEstimated reading time: Less than a minute
This paper is the third in a series that describes the journey of Optimum Design Associates (ODA) from initial concept and planning through implementation of Lean NPI. This third paper examines data from before implementation and compares it to the data that has been compiled over more than a year of using Lean NPI as a best practice. ODA utilizes Mentor’s layout tools and Valor NPI DFM tools.
To read this white paper, click here.
Share on:
Suggested Items
Airbus to Design and Build ESA’s ExoMars Rover Lander Platform
03/31/2025 | AirbusAirbus has been selected by the European Space Agency (ESA) and Thales Alenia Space (TAS - a joint venture between Thales (67%) and Leonardo (33%)), the ExoMars industrial prime contractor, to build key systems for the ExoMars lander that will safely place the Rosalind Franklin rover on the surface of the Red Planet.
North American EMS Industry Up 1.7% in February
03/31/2025 | IPCIPC announced today the February 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.33.
Merlin Circuit Technology Invest in ESI 5335 Laser Drill Technology
03/19/2025 | Merlin Circuit TechnologyMerlin has been manufacturing HDI products for more than 15 years, firstly with mechanical drilled micro vias and subsequently laser drilled vias with an ESI 5330 Laser Drill.
Gathering Around the EMS Table
03/11/2025 | Mark Wolfe, IPCWhen I entered the EMS provider industry 30 years ago, I attended some early IPC EMS management meetings. While I enjoyed the planned presentations, I especially valued the roundtable discussions with other industry peers. They not only provided an excellent opportunity to foster new relationships but also allowed me to listen to others facing similar challenges, who often addressed them in innovative ways that I could benefit from.
Siemens Boosting U.S. Investments by Over $10 Billion for American Manufacturing Jobs, Software and AI Infrastructure
03/07/2025 | SiemensSiemens is ramping up investments in the U.S. to support and benefit from America’s industrial tech growth. “The industrial tech sector is the basis to boost manufacturing in America and there’s no company more prepared than Siemens to make this future a reality for customers from small and medium sized enterprises to industrial giants,” said Roland Busch, President and CEO of Siemens AG.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in