It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Aismalibar to Exhibit at 2019 Thermal Materials Summit
April 29, 2019 | AismalibarEstimated reading time: 2 minutes
Aismalibar has announced their first exhibition at this year’s Thermal Materials Summit in Los Angeles, California on May 2, 2019. The Thermal Materials Summit educates attendees on the latest advancements in thermal interface materials for professionals working in markets such as: aerospace, electronics packaging, automotive, semiconductor/ICs, LED cooling, motor controls, power supplies, discrete electronic devices, telecom and batteries.
Aismalibar will be showcasing the following products:
Cobritherm
Cobrithem insulate metal substrates are produced with different thicknesses of aluminum and copper and can be clad with different mixtures of dielectric layers to meet the ever-changing demands of the industry. The material can be produced in a variety of styles ranging from very thin layers as small as 50 microns to grant an excellent thermal impedance and up to 130 microns, which allows it to withstand high insulation in between the conductive metal layer.
Cobritherm Ultrathin
Cobritherm Ultrathin integrates an innovative ultra-thin dielectric layer that provides higher thermal performance, excellent working temperature and reduces thermal resistance. The new Cobritherm Ultra Thin 4W features a Tg of 180ºC and an 150ºC MOT. Corbritherm Ultrathin offers industry leading thermal conductivity, strong MOT values, high Tg and low CTE which are the key elements for performance of MPCBs operating at high temperatures.
Fastherm
Fastherm is a unique product developed to achieve a faster thermal transition from the LED thermal pad to the heat sink through a pedestal technology. This superior thermal transition can be achieved by using the entire Cobritherm HTC product range with using a copper base. By using Aismalibar Cobritherm HTC range together with Fastherm technology, LEDs operate at a temperature 30ºC to 50ºC lower due to the direct thermal transition (pedestal) from the thermal pad to the heat sink.
Flextherm
Flextherm is a high technology thermal IMS for use in the production of conformable metal printed circuit boards that can be bent without compromising the initial dielectric strength between conductive layers. Its low thermal impedance allows the dissipation of temperature from the heating elements of a PCB into Flextherm’s metal core at an extremely efficient rate.
Multi-Layer PCBS
As thermal management becomes more challenging on multilayer PCBs constructions, Aismalibar has developed different substrates that can be combined to offer tailored solutions. These substrates are required in the case of complex boards with denser circuitry.
About Aismalibar
Founded in 1934 and based in Barcelona, Spain, Aismalibar manufactures high end copper and metal clad laminates for the printed circuit board industry. Aismalibar’s expertise lies in offering the best solutions to reduce the operational temperature of the printed circuit boards. Aismalibar materials ensure quality and reliability of all the products that incorporate them. Aismalibar has implemented a 100% proof test with 1-3KV (High Pot Test) to every Corbritherm IMS laminate that is produced. These materials minimize the use of supplementary fans or heat sinks, thus reducing production costs. Aismalibar now operates globally through several subsidiaries. Our priorities are, and have always been technological innovation and customer satisfaction.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.