Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
Automation and the Smart Factory: Introduction to Industry 4.0
May 13, 2019 | Happy Holden, I-Connect007Estimated reading time: 1 minute
There’s a lot of talk about automation, but I find that there is very little available on automation planning. This is one of my specialties. I started by studying for an MSEE in control theory, which went well with my bachelor’s degree in chemical engineering because I specialized in process control and IC manufacturing.
Before we get started, remember that the benefits will be derived only if certain cardinal principles are observed. This article briefly outlines the background of computer-integrated manufacturing (CIM) and its evolution to Industry 4.0 and smart factories.
The characteristics of successful automation application in manufacturing depend on how well business and technical management understand and promote the strategies, tactics, and philosophies used in modern manufacturing. Successful automation implementation can be enhanced in any company, small or large, by reviewing the philosophies of CIM, automation, management roles, mechanization, SPC, TQC, Lean, MRP, and DFM.
Computer-Integrated Manufacturing (CIM)
The strategies outlined here are considered CIM, but the current vocabulary now is “Industry 4.0” or “smart factories.” Products include various software, computer, networking, interface, and measurement systems. At that time, HP had been in the automation business longer than any other company. It all started with requests from the government and others for automated test and measurement systems. Because of the need to automate various measurement instruments and systems, HP created the first machine-to-machine, plug-and-play protocol called HP Interface Bus (HP-IB). This was later formalized into the IEEE-488 communication standard.
CIM architecture was defined as early as 1980 when the CASA/SME published a presentation of computer-integrated manufacturing to provide a common set of terms for its members. The ring surrounding the wheel represents various influencing factors for the development of CIM such as expertise as a human factor, productivity as an economic factor, and computer technology as a technological factor.
The wheel itself contains four functions, including engineering design, manufacturing planning, production control, and factory automation. If the individual functions are connected to each other and operate with a common database, an integrated system architecture is created and represented by the hub of the wheel. This development has resulted in the realization that CIM, apart from factory automation and functions, is indirectly related to the operational performance, such as design (product/process), and production planning and control.
To read this entire article, which appeared in the April 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
From Execution to Intelligence: A Data-driven Approach to Modern Manufacturing
05/06/2025 | Barry Matties, I-Connect007In this discussion, Augusto Vilarinho, an MES expert at Critical Manufacturing, explores the essential functions of MES in tracking and tracing shop floor activities where AI and machine learning capabilities are purposely built into the MES through it's embedded data platform, capturing all machine data, integrating and connecting with different systems, ERPs, physical equipment, and people.
Join the Conversation: MESI 4.0 Summit 2025 Brings Manufacturing Experts to Porto
05/06/2025 | Critical ManufacturingThe MES and Industry 4.0 International Summit 2025 (MESI 4.0 Summit), hosted by Critical Manufacturing, will bring together manufacturing leaders, technology experts, and industry pioneers in Porto on June 12-13, offering a unique platform to explore practical strategies for digital transformation and smart manufacturing.
AMI achieves 52 consecutive weeks of First Pass Yield Rates above 98.72%
05/06/2025 | Alternative Manufacturing, Inc.AMI, a leading provider of high-quality PCB assembly (PCBA) solutions, proudly announces the achievement of 52 consecutive weeks of first pass yields at test, maintaining an exceptional success rate of 98.72% or better. This remarkable accomplishment underscores the company's unwavering commitment to manufacturing excellence, quality assurance, and customer satisfaction.
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
05/06/2025 | Chris Mitchell -- Column: The Government CircuitThere is certainly no shortage of work to be done in the IPC Government Relations department, as the U.S. waged a tariff campaign on practically every industrial country in the world and several countries embarked on high-tech initiatives with a mix of approaches to the crucial foundations of electronics manufacturing. Indeed, the breadth and speed of U.S. President Donald Trump’s tariff campaign continues to be a serious challenge for our industry.
Dixon, Inventec Form JV for PC Manufacturing in India
05/05/2025 | DixonDixon has entered into Joint Venture Agreement (JV Agreement) with Inventec. Pursuant to the said JV Agreement, Dixon IT Devices Private Limited (JV Company) will be 60% owned by Dixon and 40% owned by Inventec.