Elementary, Mr. Watson: Rein in Your Design Constraints
Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Aismalibar Increases Manufacturing Capabilities In Barcelona Facility
July 8, 2019 | AismalibarEstimated reading time: 2 minutes
Aismalibar recently updated its Barcelona facility with three new pieces of equipment. With a commitment to the future, the company has carefully selected new equipment to assure their continued leadership in the thermal management laminate market.
Aismalibar has always been a strong believer in a covenant of cooperation with its customer/partners and has always strived to provide them with the very best solution available on the planet today. It is in the spirit of this covenant that the company has made these recent investments.
Commenting on these investments, Jeff Brandman, President of North American sales said, “with our close relationships with both our PCB customers and their customers we have developed a complete understanding of what their high technology laminate needs are today, and most importantly in the future, especially their Thermal management needs. It is armed with this information from our customer/partners that we decided to invest in the very best equipment available on the market today. At Aismalibar we prioritize technology and innovation making sure that it allows us to meet all of our customers’ needs. With our customers in mind, we recently added this new equipment.”
The precision CNC cutting of aluminum and copper is crucial in the manufacturing circuit of Aismalibar. This new Schelling saw is equipped with automatic loading and avoids the damage caused by manual loads. Schelling is the most valued brand in the market because it combines design, solidity, sophistication, precision and durability. Schelling products are of the highest quality, based on decades of experience in innovation as well as meticulous construction. The result is the production of daily use machines suitable for hard conditions of use, with perfect cutting results.
The Somerra automatic laminator applies a film protector with full automotation. This film allows the base materials, constructed of aluminum and copper, to be protected from moisture, stains and marks, obtaining the necessary quality to produce a product with guarantees. Aismalibar currently utilizes the TX series, a model that incorporates the latest technology developed by Somerra.
The surface treatment center has been integrated, which allows a preliminary preparation of the aluminum and copper plates through a mechanical and chemical process. This new technology has to do with the greater flexibility in the production process and offers a wide range of possibilities in surface finishes to adapt them to the needs of each industry.
About Aismalibar
Founded in 1934 and based in Barcelona, Spain, Aismalibar manufactures high end Copper and Metal Clad Laminates for the Printed Circuit Board Industry. Aismalibar’s expertise lies in offering the best solutions to reduce the operational temperature of the Printed Circuit Boards. Aismalibar materials ensure quality and reliability of all the products that incorporate them. Aismalibar has implemented a 100% proof test with 1-3KV (High Pot Test) to every IMS laminate that is produced. These materials minimize the use of supplementary fans or heat sinks, thus reducing production costs. Aismalibar now operates globally through several subsidiaries. Our priorities are now, and have always been technological innovation and customer satisfaction.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
07/11/2025 | Andy Shaughnessy, Design007 MagazineThis week, we have quite a variety of news items and articles for you. News continues to stream out of Washington, D.C., with tariffs rearing their controversial head again. Because these tariffs are targeted at overseas copper manufacturers, this news has a direct effect on our industry.I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Trump Copper Tariffs Spark Concern
07/10/2025 | I-Connect007 Editorial TeamPresident Donald Trump stated on July 8 that he plans to impose a 50% tariff on copper imports, sparking concern in a global industry whose output is critical to electric vehicles, military hardware, semiconductors, and a wide range of consumer goods. According to Yahoo Finance, copper futures climbed over 2% following tariff confirmation.
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
07/09/2025 | Happy Holden -- Column: Happy’s Tech TalkWhen we consider via reliability, the major contributing factors are typically processing deviations. These can be subtle and not always visible. One particularly insightful column was by Mike Carano, “Causes of Plating Voids, Pre-electroless Copper,” where he outlined some of the possible causes of hole defects for both plated through-hole (PTH) and blind vias.
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?