The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
MKS Instruments Inks Multiple-System Order for Flex Laser Via Drilling Solution
August 19, 2019 | MKS Instruments, Inc.Estimated reading time: 2 minutes
MKS Instruments, Inc. has announced a multi-system order from one of China’s leading flex PCB manufacturers for the recently-released ESI CapStone laser drilling solution for flexible printed circuits (FPC). The order—in double digit quantity—is the result of thorough system evaluation at one of the customer’s facilities in China.
“With a large installation base of the ESI Model 5335 systems at their various production locations, the customer has established a leadership position in the flexible printed circuit manufacturing market,” according to Kevin Yuan, Country Manager for ESI China. “After rigorous on-site production evaluation, they determined that CapStone delivers the highest productivity available, while meeting their technology requirements for the foreseeable future. In doing so, they found they could minimize their processing costs while reducing their factory footprint and operator hiring and training requirements. As a result, they decided to choose CapStone for their latest round of flexible circuit drilling capital investment.”
“We’re pleased to see such rapid market acceptance of the ESI CapStone system,” said John Williams, vice president of marketing for ESI Products. “The flex circuit laser drilling market should be boosted over time by the latest design and technology changes in the consumer electronics market, ranging from high-frequency materials for 5G phones to increased layer counts for higher signal density. The CapStone system was developed with these market trends in mind, capitalizing on the newest laser and beam positioning technologies to deliver significant throughput increases while maintaining high yield. Cost-driven competition in the printed circuit board (PCB) processing industry makes the CapStone system’s high productivity value proposition very compelling.”
The ESI brand represents an innovator in laser-based manufacturing solutions for the micro-machining and micro-electronic industries, and the CapStone system is optimized for the flexible printed circuits widely used in consumer electronics, such as smartphones and other handheld devices. The system delivers the highest productivity available, while maintaining high levels of accuracy and precision in critical parameters such as via diameter and placement.
CapStone systems are available now, either directly from ESI or through ESI channel partners world-wide.
About MKS Instruments
MKS Instruments, Inc. is a global provider of instruments, subsystems and process control solutions that measure, monitor, deliver, analyze, power and control critical parameters of advanced manufacturing processes to improve process performance and productivity for our customers. Our products are derived from our core competencies in pressure measurement and control, flow measurement and control, gas and vapor delivery, gas composition analysis, residual gas analysis, leak detection, control technology, ozone generation and delivery, power, reactive gas generation, vacuum technology, lasers, photonics, sub-micron positioning, vibration control and optics. We also provide services related to the maintenance and repair of our products, installation services and training. Our primary served markets include the semiconductor, industrial technologies, life and health sciences, research and defense. Additional information can be found at www.mksinst.com.
About the ESI Brand
ESI is a brand within the MKS Instruments Equipment & Solutions Division. The ESI portfolio consists of laser-based micro manufacturing systems and component test systems that are used worldwide by manufacturers in the electronics industry to process the materials and components that are an integral part of the electronic devices and systems in use today. Leveraging over 40 years of laser-material interaction expertise and applied laser technology, ESI solutions enable customers to optimize production by providing more control, greater application flexibility and more precise processing of a wide range of materials. The result is higher production quality, increased throughput and higher back-end yields at a lower total cost-of-ownership. Additional information can be found at www.esi.com.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Interlink Electronics Reports Q1 2026 Results
05/15/2026 | Globe NewswireRevenue for the first quarter of 2026 increased 15% to $3.07 million, compared to $2.66 million in the first quarter of 2025. The increase was driven by higher shipments of the Company’s force-sensing and printed electronics products, partially offset by lower sales of its gas‑sensor products.
SPARK Microsystems Selected for CAD $1M in Government of Canada-backed FABrIC Funding
05/14/2026 | BUSINESS WIRESPARK Microsystems, a Canadian fabless semiconductor company specializing in next-generation short-range wireless communications, has been selected by FABrIC as a CAD $1 million grant recipient funded by the Government of Canada.
What Heterogeneous Integration Means for EMS Providers
05/14/2026 | Nolan Johnson, I-Connect007Dr. Ravi Mahajan, an Intel Fellow and Director of Intel’s Technology and Pathfinding group, delivered a keynote at the APEX EXPO 2026 technical conference on using heterogeneous integration (HI) as a strategy and on how advanced packaging technology serves as the technical apex for implementing that strategy. Mahajan’s previous papers and industry presentations on such topics as interconnect density, signal integrity, power delivery, thermal path, and assembly yield as system-level constraints confirm him as an expert on package optimization.
Zhen Ding Reports Record 1Q26 Revenue; Up 1.6% YoY
05/14/2026 | Zhen Ding TechnologyZhen Ding Technology Holding Limited, a global leading PCB manufacturer, announced its consolidated financial results for the first quarter of 2026. First quarter revenue reached NT$40,728 million, up 1.6% YoY and setting a record high for the same period. Net income was NT$2,047 million, and net income attributable to the parent company was NT$1,426 million, with EPS of NT$1.33.
Casimir Launches With $12M Seed Round for Quantum Energy Chip
05/12/2026 | BUSINESS WIRECasimir, Inc., a quantum energy technology company founded by former NASA advanced propulsion researcher Dr. Harold “Sonny” White, today announced the close of a $12 million seed round led by Scout Ventures.