The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
Rogers to Offer Material Solutions at PCB West 2019 Exhibition
September 3, 2019 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation is exhibiting at the upcoming PCB West show. The PCB West exhibition will be held on September 10, 2019 at the Santa Clara Convention Center (Santa Clara, California). Visitors will find plenty of the latest high-performance circuit materials from Rogers Corp. at booth 201.
The PCB West Conference and Exhibition (www.pcbwest.com) is one of the electronic industry’s major events for PCB design, fabrication and assembly.
Rogers Presentation
John Coonrod, Rogers’ technical marketing manager, will present “An Overview of Glass-Weave Effect for PCB-Based RF and High-Speed Digital Applications” on Tuesday, September 10, from 2:00 p.m. to 3:00 p.m. during the free sessions. This presentation will include an overview of basic PCB properties in which the glass-weave effect can be influential and give examples from multiple studies which evaluated the glass-weave effect.
RO4835T/RO4835 Laminates, RO4450T Bonding Materials
RO4835T laminates, offered in a 2.5 mil, 3 mil and 4 mil core thickness, are low loss, 3.3 Dk, spread glass reinforced, ceramic-filled thermoset materials designed for inner-layer use in multilayer board designs, and complement RO4835 laminates when thinner cores are needed. RO4450T low loss, 3.2-3.3 Dk, spread glass reinforced, ceramic-filled bonding materials were designed to complement RO4835T and the existing RO4000 laminate family, and come in 3 mil, 4 mil or 5 mil thicknesses.
RO4835T laminates and RO4450T bonding materials exhibit excellent Dk control for repeatable electrical performance, a low z axis expansion for plated through-hole reliability, and are compatible with standard epoxy/glass (FR-4) processes. These materials are an excellent choice for multilayer designs requiring sequential laminations, as fully-cured RO4000 products are capable of withstanding multiple lamination cycles. RO4835T laminates and RO4450T bonding materials have the UL 94 V-0 flame retardant rating, and are compatible with lead-free processes.
Xtreme Speed RO1200 High Speed, Extremely Low Loss Laminates
As the demand for faster and more data drives channel speeds of core network infrastructure to 112 Gbps, one of the limiting factors in increasing performance is the signal attenuation resulting from the circuit materials.
Network equipment designers need high performance circuit materials with superior electrical properties for applications like IP Infrastructure, High Performance Computing, and Test and Measurement. Xtreme Speed RO1200 circuit materials are engineered to meet the unique electrical and thermal/mechanical demands of high speed designs. Rogers XtremeSpeed RO1200 circuit materials enable system designers the flexibility to design leading edge systems that maximize data throughput and minimize latency in performance demanding applications.
With a low dielectric constant of 3.05, and a maximum dissipation factor of 0.0017 @10 GHz, Rogers XtremeSpeed RO1200 laminates provide outstanding signal integrity, reduced signal skew, and reduced cross-talk. Combined with superior thermal/mechanical performance, low CTE, and a halogen free UL 94 V-0 rating, Rogers XtremeSpeed RO1200 laminates are well suited for the most demanding high layer count applications.
RO3003G2 Laminates
RO3003G2 high frequency laminates build on Rogers’ industry-leading RO3003™ platform to provide radar sensor designers with improved insertion loss and reduced Dk variation. The combination of Rogers’ optimized resin and filler content along with the introduction of very low-profile ED copper translates to Dk of 3.00 @ 10 GHz (clamped stripline method) and 3.07 @ 77 GHz (microstrip differential phase length method). RO3003G2 laminates also show very low insertion loss of 1.3dB/inch for 5 mil laminates as measured by the microstrip differential phase length method.
About Rogers Corporation
Rogers Corporation is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, visit www.rogerscorp.com.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Releases The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication
05/13/2026 | I-Connect007As PCB complexity continues to accelerate, fabricators and OEMs are reevaluating long-standing manufacturing processes to meet the demands of AI, HDI, advanced packaging, and next-generation electronics. To address these evolving challenges, I-Connect007 is proud to announce the release of The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication, authored by MacDermid Alpha Solution’s Carmichael Gugliotti.
Driving Innovation: Selecting the Right Laser Source
04/28/2026 | Simon Khesin -- Column: Driving InnovationWhen I first joined Schmoll Maschinen, I brought experience from almost every PCB process, except for laser. As I immersed myself in laser processing, I realized why it can seem so daunting to a newcomer. The complexity arises from three intersecting factors: A vast variety of laser sources: CO2, UV-nano, green-pico, UV-pico, IR-pico, and others; a diverse range of applications: Drilling, cutting, ablation, and more; and an extensive list of materials: These have vastly different absorption rates. Choosing the right machine or laser source is rarely trivial. Even for experienced engineers, answering "Which source is best?" requires examining the business's specific goals.
Institute of Circuit Technology Spring Seminar 2026: A Bright Future in Europe
04/23/2026 | Pete Starkey, I-Connect007Through the leafy lanes and spring flowers of Warwickshire and back to Meridan, the traditional centre of England, and now officially part of the Metropolitan Borough of Solihull in the county of the West Midlands, I attended the Annual General Meeting and Spring Seminar of the Institute of Circuit Technology (ICT) on April 14. Out of the AGM came notable changes in leadership at the top of the Institute: the retirement of Mat Beadel as chair and Emma Hudson as technical director. Effective May 1, Steve Driver is the new chair, and Alun Morgan is the new technical director.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
04/23/2026 | Team NCAB -- Column: Fresh PCB ConceptsWhen engineers hear the phrase “harsh environment,” they usually think of the extreme temperature swings, vibration and shock, pressure changes, or radiation in aerospace. However, aerospace is not the only harsh environment where electronic assemblies must survive. Automotive power electronics, downhole oil and gas tools, marine controls, rail systems, defense platforms, and industrial automation equipment all expose PCBs to environments that are equally unforgiving. The stress mechanisms may differ, but the physics does not.