-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
U.S. Electronics Manufacturers Grappling With Higher Costs from U.S. and Chinese Tariffs
October 23, 2019 | IPCEstimated reading time: 1 minute
Almost 90 percent of U.S. electronics manufacturers are troubled by the higher tariffs imposed by the United States and China on each other’s imports, and some are investing less in the United States and hiring fewer workers as a result.
These are among the results of a survey conducted by IPC, a global association representing the electronics manufacturing industry, which queried its U.S. members between September 25 and October 2, 2019. Among the survey results:
- On average, companies report they have seen tariff increases on 31 percent of the total dollar value of the products they import. Twenty-five percent of companies report over half of the dollar value of the products they import are facing higher tariffs.
- Some 69 percent of companies report lower profit margins as a result of increased tariffs, with a ripple effect of negative consequences: 21 percent report they are reducing investment in the United States, and 13 percent say they are cutting back on hiring and/or reducing headcount.
- More than a third of companies report they cannot increase their prices to cover the cost of higher import tariffs, due to various factors.
- Fifty-one percent of responding companies report they are now sourcing from countries other than China as a result of increased tariffs on Chinese imports.
“As the IPC research documents, rising tariffs are putting a painful squeeze on many U.S. electronics manufacturers,” said IPC Chief Economist Shawn DuBravac. “Many are facing supply-chain disruptions and steeper costs from the tariffs that have been imposed to date, and the impacts will grow as the trade war drags on.”
“Our industry has longstanding concerns about some of China’s industrial policies, including government subsidies and intellectual property violations,” said IPC President and CEO John Mitchell. “But addressing unfair trade practices by ratcheting up tariffs is like using a sledgehammer to make orange juice. In both cases, it’s the wrong tool and makes a mess of the job."
"We call on the governments of the United States and China to de-escalate the tariffs, focus on results at the negotiating table, and conclude agreements that address long-standing issues of concern to both sides," Mitchell said. "We also call on all members of the World Trade Organization to restore that body’s ability to play its role as arbiter of international trade disputes, so that nations won’t feel a need to resort to tariffs to resolve trade disputes,"
Suggested Items
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.