-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
IPC Releases PCB Industry Results for September 2019
October 24, 2019 | IPCEstimated reading time: 3 minutes

IPC — Association Connecting Electronics Industries announced today the September 2019 findings from its North American Printed Circuit Board (PCB) Statistical Program. Sales and orders continued to outpace last year and the preceding month in September, while the book-to-bill ratio strengthened to 1.04.
Total North American PCB shipments in September 2019 were up by 3.8% compared to the same month last year. Year-to-date sales growth as of September remained positive at 7%. Compared to the preceding month, September shipments increased 10.2%.
PCB bookings in September increased by 12.2% year-over-year, pushing year-to-date order growth up to 3%. Bookings in September were up by 2.5% from the previous month.
"Business growth is continuing in the North American PCB industry, based on uniformly positive September results in both sales and orders, as well as an increase in the book-to-bill ratio," said Sharon Starr, IPC's director of market research. "The growth cycle that began in mid-2017 has continued for over two years, although year-on-year growth rates have been modest in recent months. The strengthening book-to-bill ratios in the last two months are good news, but they were preceded by three months at or below parity. This indicates the likelihood of slow but mostly positive sales growth in the next two quarters."
Detailed Data Available
The third-quarter 2019 edition of IPC’s North American PCB Market Report, containing detailed data from IPC’s PCB Statistical Program, will be published by mid-November. The quarterly report presents detailed findings on rigid PCB and flexible circuit sales and orders, including separate rigid and flex book-to-bill ratios, growth trends by product types and company size tiers, demand for prototypes, sales growth to military and medical markets, and other timely data. This report is available free to current participants in IPC’s PCB Statistical Program and by subscription to others. PCB companies that are IPC members doing business in North America are invited to contact marketresearch@ipc.org for information about participating. More information about this report can be found at www.ipc.org/market-research-reports.
Interpreting the Data
The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC's survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next three to twelve months. A ratio of less than 1.00 indicates the reverse.
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they reflect seasonal effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month might not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in both bookings and shipments to understand what is driving changes in the book-to-bill ratio.
IPC's monthly PCB industry statistics are based on data provided by a representative sample of both rigid PCB and flexible circuit manufacturers selling in the USA and Canada. IPC publishes the PCB book-to-bill ratio at the end of each month. Statistics for the current month are normally available in the last week of the following month.
About IPC
IPC (www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 5,600-member company sites which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly, and test. As a member-driven organization and leading source for industry standards, training, market research, and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Stockholm, Sweden; Brussels, Belgium; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.
Suggested Items
Real Time with... IPC APEX EXPO 2025: Revitalizing the U.S. Microelectronics Industry with PCBAA
04/01/2025 | Real Time with...IPC APEX EXPOPCBAA president David Schild discusses his experience in the PCB and aerospace sectors, focusing on the mission of the PCBAA and its collaboration with IPC. He highlights the decline in PCB manufacturing in the U.S. and the importance of public policy in restoring capacity.
Real Time with... IPC APEX EXPO 2025: Highlighting Global PCB Trends and Technologies with all4-PCB
04/01/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy and all4-PCB's Ralph Jacobo discuss global distribution trends in the PCB industry, focusing on new technologies in plasma etching and final inspection. Ralph highlights the importance of IC substrate buildup technology and partnerships in the market.
IPC APEX EXPO 2025: We’ve Got It Covered
04/01/2025 | I-Connect007 Editorial TeamIPC APEX EXPO is the largest electronics manufacturing trade show in North America, bringing together professionals from all sectors of the supply chain to educate, network, and share their products and services. We’ve put all our coverage of the show in one easy-to-find location. Just click on “Videos,” “Show Coverage” and “Photos” to find what you’re looking for. Check back regularly as more content is added. You won’t want to miss any of our unique coverage.
Incap Launches ‘Incap Legends’ esports Tournament and Invites Students from Around the World to Participate
03/31/2025 | IncapIncap Corporation is proud to announce the launch of ‘Incap Legends’, a new esports tournament in partnership with Newcastle and Stafford Colleges Group (NSCG).
IPC APEX EXPO 2025 Review: Expecting the Unexpected
03/31/2025 | Tom Kastner, GP VenturesOne of the best things about trade shows is not the scheduled meetings but the chance meetings that come up unexpectedly. Just because you happened to go down one aisle instead of the next, you bump into an old acquaintance that you have not seen for years, or you happen to talk to the guy in line next to you to get a $5 Pepsi, and it turns into a great, new connection.