Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Fresh PCB Concepts: PCB Plating Process Overview
Indium's Dr. Jie Geng to Present at IPC Electronics Materials Forum
October 25, 2019 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation expert Dr. Jie Geng, Research Metallurgist, will share his knowledge at the IPC Electronics Materials Forum, November 5-7, Minneapolis, Minn., USA.
Dr. Geng will present Fluxes Designed for Suppressing Non-Wet-Open during BGA Assembly, which examines the increasing severity of warpage and non-wet-open (NWO) defects during BGA assembly due to the continuing advancement of miniaturization. He will discuss how a “cold-welding barrier” method utilizing a flux coating has been developed to suppress NWO defects.
He will also present A Novel Medium-Low Temperature Solder Paste, detailing the development of a new lead-free solder paste with a reflow peak temperature of 200°C. The finished solder joint melted between 180–200°C, allowing for a hierarchy assembly process with alloys that have melting temperatures around 140°C, 190°C, and 220°C.
Dr. Geng focuses on the development of novel lead-free high-reliability solder alloys for automotive applications. He also investigates the assembly process technologies in electronic packaging and interconnections. Dr. Geng earned his Ph.D. in Metallurgy from University of Surrey in the U.K. He continued as a materials scientist after graduation and has extensive experience on materials selection, design, processing, and characterization, especially on processing-structure-property relationships in various materials, including ultra-high temperature alloys, lightweight alloys (Al and Mg), magnetic materials, and ceramics. Dr. Geng is skilled in combinatorial and high-throughput material design using 3D printing and computer programming with Python. He has published more than 20 journal articles in the field of materials science and engineering. He also serves as a peer reviewer for numerous journals.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit www.indium.com.
Share on:
Suggested Items
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.
SolderKing Celebrates a Year of Expansion, Innovation, and Sustainability Achievements
12/09/2024 | SolderKing Assembly Materials Ltd,SolderKing Assembly Materials Ltd, a leading UK-based manufacturer of soldering materials and consumables, has wrapped up 2024 with a series of milestones that reflect its ongoing growth and commitment to innovation.