-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Boeing Starliner Completes First Orbital Flight Test with Successful Landing
December 23, 2019 | BoeingEstimated reading time: 1 minute
The Boeing CST-100 Starliner's first mission ended historically today when it became the first American orbital space capsule to land on American soil rather than in an ocean.
The spacecraft's crew module landed at the U.S. Army's White Sands Missile Range at 5:48 a.m. Mountain time, after spending just over two days on orbit and checking off a number of flight test objectives. The last time a spacecraft landed at the historic White Sands Space Harbor runway was in 1982, when Space Shuttle Columbia touched down, ending its STS-3 mission.
Shortly after its December 20 launch and separation from its booster rocket, Starliner experienced a mission timing anomaly that made it use too much fuel to reach the intended destination of the International Space Station. Flight controllers were able to address the issue and put Starliner into a lower, stable orbit. The vehicle demonstrated key systems and capabilities before being signaled to return to Earth.
"The Starliner team's quick recovery and ability to achieve many mission objectives – including safe deorbit, re-entry and landing – is a testament to the people of Boeing who have dedicated years of their lives working toward the achievement of commercial human spaceflight," said John Mulholland, vice president and program manager of Boeing's Commercial Crew Program. "Their professionalism and collaboration with our NASA customer in challenging conditions allowed us to make the most of this mission."
The Starliner landing demonstrated the robustness of its landing systems, including its innovative parachutes and airbags.
Although this Starliner carried no people, it did have a passenger. An anthropometric test device, named "Rosie," was in the commander's seat for the entire mission. She was outfitted with about a dozen sensors that collected data to help prove Starliner is safe for future human crews.
Next, this crew module will be returned to Florida for data retrieval, analysis and refurbishment for future missions. It is the vehicle chosen to fly NASA astronauts Sunita "Suni" Williams and Josh Cassada, along with two international partner astronauts, on the first operational mission. In parallel, Boeing's Starliner team is finalizing the vehicle that will fly Boeing astronaut Chris Ferguson and NASA astronauts Mike Fincke and Nicole Mann on the Crewed Flight Test.
Suggested Items
SMTA UHDI Symposium: Shortening the Learning Curve
01/15/2025 | Marcy LaRont, I-Connect007SMTA’s second annual UHDI Symposium on Jan. 23 in Phoenix will highlight groundbreaking discussions on UHDI assembly test board, innovative electronic inks, process controls, and signal integrity solutions. Organizer Tara Dunn talks about the importance of the event and how she prepared presentations and discussions that would appeal to fabricators, assemblers, and designers. This event will shorten your learning curve and spark new ideas that push the boundaries of hardware electronics manufacturing. There’s still time to register.
Advantest Forms Strategic Partnerships with FormFactor and Technoprobe
01/09/2025 | AdvantestLeading semiconductor test equipment supplier Advantest Corporation announced that it has entered into small minority investments and partnership agreements with both Technoprobe SpA and FormFactor, Inc.
Revolutionizing PCB Testing: RoBAT's Journey from S1 to SCARA
01/07/2025 | Marcy LaRont, PCB007 MagazineFrom the early days of simple continuity testers to the advanced SCARA machines, RoBAT's evolution in time-domain reflectometer (TDR) and test technology is a testament to the company's commitment to excellence and adaptation in a rapidly changing industry. In this discussion, RoBAT’s Bruce Nockton discusses the journey, challenges, and importance of automating testing solutions, and highlights how RoBAT has become a frontrunner in delivering high-precision testing equipment, setting new standards for the industry.
Biden-Harris Administration Awards SRC $285M for New CHIPS Manufacturing USA Institute for Digital Twins
01/07/2025 | U.S. Department of CommerceThe U.S. Department of Commerce announced that CHIPS for America awarded the Semiconductor Research Corporation Manufacturing Consortium Corporation (SRC) $285 million to establish and operate a CHIPS Manufacturing USA institute headquartered in Durham, North Carolina.
The Test Connection, Inc. Celebrates 45 Years of Excellence in Test Engineering Solutions
01/06/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, proudly marks its 45th anniversary in 2025, celebrating decades of delivering high-quality test engineering solutions to the electronics industry. Founded in 1980 by Bill Horner, TTCI emerged as a pioneer in response to the increasing demand for outsourced test engineering products and services. Since its inception, the company has built a legacy of innovation, technical expertise, and world-class customer service.