Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
A Design Economics Primer
May 21, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
When you start a new design, do you begin tracking costs right away, or do you wait until you have a functioning product before you start looking at the dollars and cents? Chris Young begins cost-aware design before the design cycle has even begun. Andy Shaughnessy and Nolan Johnson recently interviewed Chris, an engineer with The Goebel Company and founder of Young Engineering Services, and asked him to explain his approach to design economics.
Andy Shaughnessy: Tell us about your position and responsibilities, and we’ll go from there.
Chris Young: At The Goebel Company, I’m the chief hardware engineer. My primary responsibilities are product architecture, design, and development, which starts from a customer need and progresses into delivery and sustainability.
Shaughnessy: You have a pretty wide view of things.
Young: I’ve been lucky to be exposed to quite a bit of stuff. I’ve worked on product development from the cradle to the grave in the avionics industry, semiconductor and semiconductor test, and developing test systems for space and medical devices, ranging from airborne surveillance systems to electromechanical medical devices. I’ve had the pleasure of working with many different people in various industries.
Shaughnessy: We have been talking about design for profitability for a couple of years, and we started looking into the whole issue of design economics. In your position, how important is the cost of what you’re doing? Young: Along with the chief technologist, we are primarily responsible for the profitability of the company. The products that I design are directly related to revenue and profit.
Shaughnessy: You’re looking at the cost from the very beginning of the design cycle?
Young: You must. In my career, I have developed a systems view of what’s happening, which has shaped how I approach the issue of costs and profitability. It also depends on the environment that you’re in. I always ask myself basic questions, such as, “What are we trying to do? When do we need to do it? How are we going to do it? Which market are we addressing? What do we think our budget is?”
To read this entire article, which appeared in the April 2020 issue of Design007 Magazine, click here.
Share on:
Suggested Items
PCB Layout Rules of Thumb for Consideration
11/25/2024 | Patrick Davis, Cadence Design SystemsJust because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from USD 3.9 billion in 2024 to USD 9.2 billion by 2031.
KYZEN to Spotlight KYZEN E5631, AQUANOX A4618 and Process Control at SMTA Silicon Valley Expo and Tech Forum
11/21/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Silicon Valley Expo & Tech Forum on Thursday, December 5, 2024 at the Fremont Marriott Silicon Valley in Fremont, CA.