-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueDesigning Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
DownStream Technologies Update With Joe Clark
June 17, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 7 minutes

On June 15, Andy Shaughnessy spoke with Joe Clark, co-founder of DownStream Technologies, about the company’s drive to take care of its customers and employees throughout the pandemic and beyond.
As the U.S. slowly starts reopening, Joe discusses some of his customers’ current challenges, especially those working from home for the first time, and how DownStream’s forecast has helped the company prepare for the uncertainties in the industry right now. He also explains the company’s focus on presenting educational webinars, and why he believes that webinars will continue to be a major format for training, though nothing will ever replace face-to-face classes at conferences and trade shows.
Related Links:
- To download the audio (mp3) file for this interview, click here.
Audio Transcript:
Andy Shaughnessy: Hi, Andy Shaughnessy here for Design007. Today, I’m speaking with Joe Clark, co-founder of DownStream Technologies. Welcome, Joe.
Joe Clark: Thanks for the opportunity, Andy. It’s good to talk to somebody.
Shaughnessy: You stayed up and running during the pandemic. Why don’t you give us a quick update on DownStream?
Clark: Sure. We have indeed, like many companies, continued with business. Our business plan, Andy, was done like most companies in the November/December timeframe, and it was based on a very good 2019. We weren’t crazy optimistic, but we looked for some modest growth over what we did in 2019. That was before any of us could spell “corona.” Well, maybe we could spell the beer, but not the virus. Getting into January and then February, we started hearing more about this. Companies were starting to send their employees home to work for home and so on. Today, we’ve met the plan that we laid out before any of this started. Our business success to date has been very good. We’re on plan. My own belief is that the second half of the year will be more difficult.
We don’t have any misgivings that we’re going to have a flat or a slightly down year, given the circumstances. We are planning for the second half of the year to be more challenging for us, especially Q4. I don’t have a crystal ball, but given what’s occurred, it’s reasonable to expect some softness. But we’re pleasantly surprised and happy with the results so far, which have been to plan.
Shaughnessy: There have been some silver linings, definitely.
Clark: Absolutely. And we, like many companies, are all working from home. We’ve successfully transitioned that. We initiated that activity before it was mandated in Massachusetts so that we were set up in time rather than having it be mandated and then panicking and trying to get out and put it in place. We were all prepared and working from home fully. We’ve opened the office back up, but it’s only partially open.
Shaughnessy: What trends do you see in the industry right now?
Clark: I guess there are two. The standard typical productivity technology trends that we all deal with on an annual basis, and then coronavirus pandemic trends. On the productivity and technology level, companies are still having to deal with new technologies, and how do we bring them in-house and keep the same level of productivity while we bring in new technologies? I talked with you at IPC APEX EXPO about this as well, and we’re heavily invested in developing new releases to support this, but the major issues our customers are dealing with are flex and embedded components—not only in their documentation, but in their space of design for manufacturing, or find that these designs can be manufactured correctly and in volume.
That’s ongoing, and as a result of the coronavirus, we see a slowdown in that area in the sense that many companies with the coronavirus focused on our employees now have to work from home. It’s not some of us trading days working from home; everybody’s working from home. Their immediate impact for many companies was setting up all the tools, resources, etc., for everybody to be working from home. And there was some difficulty with that. We’ve worked with many of our customers. For example, we would set up extra licenses on home computers to help them so that they could be productive. We added licenses to their service because there are now more people checking them out, and they aren’t communicating with each other because they’re all home. We also expanded wide-area networking (WAN) access.
In other words, we partnered with our customers to help them get themselves set up. And we weren’t the only ones doing that. They had their hands full, again, setting everybody up at home. That’s certainly most of the first quarter and into the second quarter. With everybody working from home as well, you see less focus on productivity improvements, new tools, and new ideas because we’re going to kind of put that to bed right now. We’re going to focus on just surviving as we are right now until we can go back to the office. There are two trends there. Again, there are the ongoing technology trends that companies are dealing with, as well as the results of this coronavirus, and that has been the primary focus of most companies.
Shaughnessy: And one thing I’ve noticed during this whole thing is that DownStream has been producing a lot of webinars. Do you see that as being a major format for designer training as we move past the pandemic?
Clark: Yes, yes, and yes. We’ve all talked about this where we rely too much on the internet for information and decision making and so on—less face time, which I don’t think is a good thing. Trade shows, user groups, and different forums where people can come together and see your new idea have suffered in the past. But with companies, as we just talked about, now being forced for everybody to work from home, they’ve actually been very successful at this. In fact, in our webinars, this has been an interesting development. We have many of our existing customers—not only new customers—which is the primary focus. It’s about new opportunities and getting your idea out there, but we’ve had existing customers come in large numbers. It’s almost like they are saying, “I have time on my hand. I want to learn more about what all the capabilities are that I may not be aware of in these DownStream tools.”
As a result of that, we’ve driven new sales because the capacity requirements go up—separate from just being at home and the license sharing and so on that we did to partner with our customers. This tool will pass this current pandemic, and we’ll get back to some sense of normalcy. The success companies have seen virtually will be with us forever, and I’ll give you an analog to that. My wife is a doctor, and for a pretty significant period of time, she had to shut her office, as many doctors and dentists did. But what has grown out of this current situation as a doctor is virtual medicine. It really wasn’t something that was being practiced very much—certainly not in this country. And it is now a very hot topic, and the doctors are now very interested in this capability. It has a long way to go, but it’s an analog to what I was talking about here.
It’s going to be with us, and it’s going to grow as part of our business. It’s all as good as the apps that they have, and these companies are developing this technology—the internet and bandwidth we have; it’s all a reality, and we’ve been forced into doing it. And it has worked pretty well. This virtual world that we’re living in is going to be with us after as well. And for companies like us, we will work to take advantage of it. Though I’m an old-timer and still think face time and the trade shows and those venues are still very important.
Shaughnessy: Joe, is there anything else you’d like to add, or we haven’t covered?
Clark: No, that’s pretty much it. Talking about the virtualization, one of the things that we haven’t heard yet, several companies—which is eye-opening to me, and this has worked so well for them—are talking about a permanent work from home where there are gains from that. There’s no travel time, trust reduction, low costs of facilities, and so on. We might even see companies that, for the most part, where there may be periodic days where you have to come in the office, but a large part of the workforce will be working remotely permanently. It will be interesting.
Shaughnessy: It’s definitely interesting.
Clark: Interesting times. And we have a ways to go in this year. I’m always optimistic, but we’ll see what comes in the second half.
Shaughnessy: All right. Joe, thanks for speaking with me. It’s always a pleasure.
Clark: Thanks, Andy. Same here.
Shaughnessy: Again, I’ve been speaking with Joe Clark of DownStream Technologies. I’m Andy Shaughnessy for Design007. Thanks for listening.
Suggested Items
Nolan's Notes: The Next Killer App in Component Manufacturing
05/02/2025 | Nolan Johnson -- Column: Nolan's NotesFor quite a while, I’ve been wondering what the next “killer app” will be in electronics manufacturing and why it has been so long since the last disruptive change in EMS. I believe the answer lies in artificial intelligence, which has exploded as the next disruptor.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/02/2025 | Marcy LaRont, PCB007 MagazineIn our industry, this week’s must-read features include CEE’s Tom Yang and his perspective on having a global business amidst tariff talk and other challenges. Joe Fjelstadt talks to the “Flexperts,” Nick Koop of TTM and Mark Finstead of Flexible Circuit Technologies. Nolan Johnson interviews the McGucken Group about the importance of empathic leadership in BANI times. NCAB’s Ryan Miller writes about reliability and compliance for building PCBs for medical applications, and surprise, more news from Siemens.
Indium Wins EM Asia Innovation Award
05/01/2025 | Indium CorporationIndium Corporation, a leading materials provider for the electronics assembly market, recently earned an Electronics Manufacturing (EM) Asia Innovation Award for its new high-reliability Durafuse® HR alloy for solder paste at Productronica China in Shanghai.
Elephantech, Logitech Together Drive Disruptive Electronics Innovation
05/01/2025 | ElephantechElephantech Inc. announced a groundbreaking collaboration with Logitech International to revolutionize peripherals manufacturing and the printed circuit board (PCB) industry.
SEL Receives Purdue Senior Design Partner of the Year Award
05/01/2025 | Schweitzer Engineering LaboratoriesSchweitzer Engineering Laboratories (SEL) has been awarded the Senior Design Partner of the Year Award from the Edwardson School of Industrial Engineering at Purdue University.