Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Attendance Soaring for 2020 Design Automation Conference
July 31, 2020 | Business WireEstimated reading time: 1 minute
Total conference attendance at the 2020 Design Automation Conference (DAC), the industry’s premier event dedicated to the design and design automation of electronic circuits and systems, leapt by 52% compared to DAC 2019, according to the 57th DAC Executive Committee (EC).
The intense engagement at the 57th DAC, held for the first time virtually due to the recent pandemic, reflected a voracious appetite among engineers for information and insights to propel design innovation. Submissions to DAC’s research track increased by 20% in the past two years, and the Designer, IP and Embedded Tracks submissions increased by 15% compared to 2019, continuing a steady three-year rise.
The global reach of DAC, July 19 - 24, soared at the 2020 virtual event with attendance from the following regions: 24% Asia Pac, 11% Europe, 52% United States and 13% a combination of Canada, South America and Middle East.
Despite the economic and social disruption caused by the pandemic, design innovation never sleeps,” said Zhuo Li, General Chair of the 57th DAC. “We had record attendance viewing each of the four Keynotes, plus attendees globally were able to view the recorded technical sessions at their leisure in their respected time-zones. The rise in submissions across all tracks proves the electronic design ecosystem is thriving and expanding in this particularly challenging time for all of us world-wide.”
Engagement with technical content exceeded expectations at the virtual event in all tracks and independent sessions. The content expanded across all aspects of the electronic design ecosystem from electronic design automation (EDA), embedded systems, security and privacy, IP, AI/machine learning, and autonomous systems.
Total number of sessions and programs at the DAC 2020 virtual event:
- 416 Recorded technical session videos
- (Research, Designer, IP, Embedded Systems & Software Tracks plus RISC-V and Design on Cloud presentations)
- 449 PDF Papers/Posters
- 9 Live research panels
- 17 Live tutorial sessions
- 40 Live Ph.D Forum presentations
- 41 Live DAC Young Fellow sessions
- 2 Live “Meet the Award Winner” sessions
- 1 Live Accellera lunch and learn technical panel
- 10 Live virtual happy hours
Preliminary attendance figures for the 57th DAC are follows:
- Conference attendees – 2,383
- I Love DAC - 3,338
- Exhibitors’ booth staff – 408
Total attendees as of Monday, July 27: 6,129
Registration is currently open with on-demand access for all registered attendees to the pre-recorded 57th DAC program through August 1, 2020. Keynotes, SKYtalks, Tech Talks and exhibitor content will be accessible through September 1, 2020 for all pre-registered attendees. For more information on the Design Automation Conference please visit www.dac.com.
Share on:
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.