-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Releases September Outlook Report
September 22, 2020 | IPCEstimated reading time: 3 minutes
The economy improved over the last month, but it is clear that momentum is slowing and future growth will likely be more difficult to come by.
In the United States, the rate of new COVID-19 cases has slowed somewhat, which has likely helped to reduce some uncertainty. Manufacturing sentiment moved higher again, and the outlook for new orders and production remains solid. Consumers also appear somewhat less concerned about the year ahead, though expectations remain half as favorable as they did at the start of the year. Consumer sentiment in the United States has ebbed around April’s lull but remains above the lows experienced during the last recession. However, other uncertainties remain, and business and consumer sentiment could slip in the coming months. In the United States, the outcome of November’s election will increasingly weigh on sentiment, and uncertainties around another stimulus bill will influence businesses’ investment decisions and Americans’ spending habits. Retail sales in August slowed as the end of CARES Act cash payments and pandemic unemployment payments created a headwind for consumer spending. At the same time, many areas of retail sales are above pre-pandemic levels calling into question how far retail sales can go when, employment remains depressed and purchasing power has been curtailed.
In Europe, countries began to relax their stay-at-home orders in earnest. Businesses began to reopen as consumers worked toward a new normal. But rising cases of COVID-19 could dampen the recovery. France, for example, recently reported its highest daily increase of infections since the pandemic began in mid-February.
The Organization for Economic Co-operation and Development (OECD) recently “raised” its outlook for the global economy for 2020. The OECD now says the world economy shrank by 4.5 percent, up from its June forecast of a 6 percent decline. While the economy is doing better than anticipated, it isn’t great. Only China will see positive growth in 2020 among the G20 countries.
Economies are extremely fragile right now, and any policy blunders will stymie the recovery. In the United States, there has been talk of additional fiscal stimulus but little movement forward. On the monetary front, the Federal Reserve remains committed to accommodative policy for several years, and interest rates are expected to stay near zero at least through 2023. The European Central Bank (ECB) recently announced it was leaving its policy programs unchanged, but many expect the entity will expand its bond purchase stimulus.
There is also growing concern that the expiration of some policy measures might push the economy back into contraction. In the United States, the expiration of eviction moratoriums will create a headwind. In Europe, the expiration of short-time work benefits could drive layoffs and increase the unemployment rate. Other policy measures will be dictated by economic realities yet to materialize. For example, weakness in the dollar will create a challenge for Europe in the coming year. The Euro continues to strengthen against the dollar, which will support U.S. exports but will likely hurt European exports at a time when manufacturers are working to move operating rates higher.
In both the United States and Europe, manufacturing has recovered a significant portion of ground lost to the pandemic, but most sectors remain below prepandemic levels. While manufacturing is expanding, manufacturers remain cautious. New orders and production are expanding on both continents, and backlogs are growing. This, in turn, is keeping prices firm, but manufacturers are not expanding employment, and inventories remain lean. Capital investment is likely to remain in check. Demand is anything but certain, and manufacturers are responding to an uncertain environment by trying to keep costs contained.
The initial recovery brought strong growth rates almost across the board as the economies reopened; however, as growth slows, we are likely to see a divergence in across sectors. The electronics industry continues to appear to have weathered the pandemic most favorably. Production is up in recent months and positive on a year-over-year basis in both the United States and Europe.
While downstream markets for electronics have been recovering, many are showing signs of slowing growth. The automotive industry was especially hard hit by the pandemic but recovered swiftly. Some of the pandemic-induced, pent-up demand has cleared, and now the auto industry is showing signs of a slowdown. In the last month, auto production declined from July. Sectors of the economy will likely feel a divergence in recovery as growth slows and some areas of the economy recover more fully than others.
Read the full report at ipc.org.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.
North American EMS Industry Shipments Down 1.4% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.26.
North American PCB Industry Sales Up 12.8% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 0.98.
Industry Leaders Shape a Sustainable Future at 2025 IPC CEMAC Electronics Manufacturing Annual Conference
09/30/2025 | Global Electronics AssociationThe 2025 IPC CEMAC Electronics Manufacturing Annual Conference, co-hosted by the Global Electronics Association and the Shanghai Pudong Association for Quality and Technology, successfully concluded on September 26 in Shanghai.