Designers Notebook: Impact of Advanced Semiconductor Packaging on PCB Stackup
Connect the Dots: Designing for Reality—Solder Mask and Legend
Target Condition: Advanced Packaging Technologies—Look Before You Leap
TopLine Exhibiting in 58th Annual NSREC IEEE Conference
November 17, 2020 | TopLineEstimated reading time: 1 minute
TopLine Corporation will exhibit in the 58th annual IEEE Nuclear and Space Radiation Effects Conference (NSREC), which will have its first Virtual Conference and Exhibition beginning November 29 and accessible through December 30. Live virtual Exhibits will be accessible December 1-8.
Visitors to TopLine’s virtual booth will be able to chat with Martin Hart, CEO, as well as Jared, Steve and Teresa. Visitors may also enter the TopLine Raffle for a $100 Amazon Gift Card and attend TopLine’s December 4, 2:00-2:30pm EST Virtual Webinar titled “Solder Columns - Extending Operating Life For 20 Year Missions.” TopLine specializes in repairing and restoring valuable Column Grid Array (CGA) FPGA components to usable condition by replacing bent or damaged solder columns with fresh solder columns made in the USA. FPGA devices with solder columns are primarily used in space defense applications. TopLine also manufactures Pb80/Sn20 copper wrap solder columns as well as traditional Pb90/Sn10 columns. Columns and attachment tool kits are produced in the USA.
NSREC is the leading conference on radiation effects on integrated circuits and worldwide attendance is expected at 500. TopLine will exhibit Column Grid Arrays at NSREC. The conference will “go live” on-line from November 29 through December 8 with added opportunities for attendees to interact with speakers, exhibitors, and one another including TopLine personnel. The content will continue to be available online until December 30, 2020.
Share on:
Suggested Items
SolderKing to Highlight Innovations in Soldering and Manufacturing Efficiency at Southern Manufacturing & Electronics 2025
01/08/2025 | SolderKing Assembly Materials Ltd,SolderKing, a leading UK manufacturer of advanced soldering materials and consumables, will be exhibiting at the Southern Manufacturing and Electronics Show from 4-6 February 2025 at the Farnborough International Exhibition Centre, Stand J90.
Altus Highlights Heller Industries Advances in Void Reduction Under 1%
01/06/2025 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, emphasises the importance of reducing voids in reflow soldering to improve manufacturing efficiency and product reliability
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.