-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
November 27, 2020 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes

Well, it’s the last Friday in November. On any normal year in the U.S., this would be “Black Friday” because, for many retailers, the kickoff to the holiday season’s shopping spree is the source for most of the operating income for the year. While it remains to be seen how exactly how much traditional in-store and online retailing will rake in, with the varied pandemic lockdowns, it’s clear that readers wanted to get the latest electronics industry sales numbers! So, we’ve included the PCB and semiconductor sales and bookings report here.
In addition, I-Connect007 columnists captured reader attention this last week. We bring you three columns exhibiting excellent information and great writing as well.
Be safe as you close out November and enter into the last month of 2020. There are even more changes over the horizon for us in 2021, though many of them look to be leading us out of our current (temporary?) situation.
North American PCB Industry Sales Up 3 Percent in October
November 23, 2020
I can’t improve on the comments from Shawn DuBravac himself: “The current environment is starting to look increasingly like a normal recession and less like the initial shock. While PCB shipments were generally in line with expectations, bookings continue to fall below average.” But the future may have better news.
North American Semiconductor Equipment Industry Posts October 2020 Billings
November 20, 2020
Meanwhile, the semiconductor industry sees growth. “The semiconductor industry remains resilient despite challenges posed by the pandemic and geopolitical tensions,” said Ajit Manocha, SEMI president and CEO. The uptick in semiconductors is often a leading indicator for an increase in PCB bookings as well.
Design Circuit: Failures of Imagination—A Column of Caution
November 20, 2020
In his column, originally published in the November 2020 issue of Design007 Magazine, IPC’s Patrick Crawford explores the root cause of failures: failures of nerve and failures of imagination. Crawford draws upon history and the work of author Arthur C. Clarke in his essay, which is neither a failure of nerve nor of imagination. This is an excellent four-minute, thought-resetting read.
Standard of Excellence: Bringing Your Salespeople Together
November 23, 2020
Anaya Vardya and the team at American Standard Circuits turn their partner philosophy to sales departments. It’s all too easy to think of sales folks as competitors—even between two companies collaborating with each other. Anaya Vardya makes the case that the sales teams (perhaps especially) should partner, too.
Trouble in Your Tank: A Process Engineer’s Guide to Final Etching, Part 1
November 20, 2020
Mike Carano’s column is a rock-solid, steady presence here at I-Connect007, and is always full of technical detail, chemistry, and deep knowledge. Carano’s audience reflects the high value given to the applicability of his column. This particular column, however, drew significantly more readership than normal, and when you read it yourself, you’ll see why. When a masterful columnist like Carano pens a diamond amongst gems, it’s worth showcasing.
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
I-Connect007 Launches Advanced Electronics Packaging Digest
09/15/2025 | I-Connect007I-Connect007 is pleased to announce the launch of Advanced Electronics Packaging Digest (AEPD), a new monthly digital newsletter dedicated to one of the most critical and rapidly evolving areas of electronics manufacturing: advanced packaging at the interconnect level.
ICAPE Group Unveils Exclusive Report on Sustainability in Electronics Manufacturing
09/15/2025 | ICAPE GroupICAPE Group, a global leader in printed circuit boards (PCBs) and custom electronics manufacturing, today announces the launch of its 2025 Industry Outlook & Innovation Report: Sustainability in Electronics Manufacturing. This exclusive report is accompanied by fresh insights from a dedicated Statista survey of 100 electronics manufacturing professionals, commissioned by ICAPE Group.
Panasonic Industry will Double the Production Capacity of MEGTRON Multi-layer Circuit Board Materials Over the Next Five Years
09/15/2025 | Panasonic Industry Co., Ltd.Panasonic Industry Co., Ltd., a Panasonic Group company, announced plans for a major expansion of its global production capacity for MEGTRON multi-layer circuit board materials today. The company plans to double its production over the next five years to meet growing demand in the AI server and ICT infrastructure markets.
Sustainability and Selective Soldering
09/15/2025 | Dr. Samuel J. McMaster, Pillarhouse InternationalSustainability is more than just a buzzword for the electronics industry; it’s a key goal for all manufacturing processes. This is more than a box-ticking exercise or simply doing a small part for environmentally friendly processes. Moving toward sustainable solutions drives innovation and operational efficiency.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.