Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
The Shaughnessy Report: A Handy Look at Rules of Thumb
Chapter 2 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’
December 21, 2020 | Anaya Vardya, American Standard CircuitsEstimated reading time: 1 minute
Chapter 2: IMPCBs or MCPCBs
Insulated metal PCBs (IMPCB) or metal-clad PCBs (MCPCB) are a thermal management design that utilizes a layer of solid metal to dissipate the heat generated by the various components on the PCBs. When metal is attached to a PCB, the bonding material can either be thermally conductive but electrically isolative (IMPCBs or MCPCBs), or in the case of RF/microwave circuits, the bonding material may be both electrically and thermally conductive. The reason that RF designers usually have the bonding material thermally and electrically conductive is that they are using this not only as a heat sink but also as part of the ground layer. The design considerations are quite different for these different applications.
This chapter will focus on the IMPCB design considerations, and Chapter 4 will focus on RF thermal management. We will focus on things designers should be discussing with their PCB supplier to ensure manufacturability and a successful product launch. Since the choices, options, and decisions can be extremely complicated, it is critical to engage early and collaborate with the PCB fabricator about the specific design to ensure the most cost-effective solution.
Some of the more common applications of IMPCBs include:
- Power Conversion: Thermal-clad offers a variety of thermal performances, is compatible with mechanical fasteners, and is highly reliable
- LEDs: Using thermal-clad PCBs ensures the lowest possible operating temperatures and maximum brightness, color, and life
- Photovoltaic Energy: Renewable energy to power telecommunications, military camps, residential and commercial structures, and battery charging stations
- Motor Drives: Thermal-clad dielectric choices provide the electrical isolation needed to meet operating parameters and safety agency test requirements
- Solid-State Relays: Thermal-clad offers a very thermally efficient and mechanically robust substrate
- Automotive: The automotive industry uses thermal-clad boards, as they need long term reliability under high operating temperatures coupled with their requirement of effective space utilization
To download The Printed Circuit Designer’s Guide to…Thermal Management: A Fabricator’s Perspective, click here. You can also view other titles in our full library. Check out other books from American Standard Circuits, including The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs and Flex and Rigid-Flex Fundamentals.
Share on:
Suggested Items
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from USD 3.9 billion in 2024 to USD 9.2 billion by 2031.
KYZEN to Spotlight KYZEN E5631, AQUANOX A4618 and Process Control at SMTA Silicon Valley Expo and Tech Forum
11/21/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Silicon Valley Expo & Tech Forum on Thursday, December 5, 2024 at the Fremont Marriott Silicon Valley in Fremont, CA.
Flexible Thinking: Rules of Thumb: A Word to the Wise
11/20/2024 | Joe Fjelstad -- Column: Flexible ThinkingIn the early days of electronics manufacturing—especially with PCBs—there were no rules. Engineers, scientists, and technicians largely felt their way around in the dark, making things up as they went along. There was a great deal of innovation, guessing, and testing to make sure that early guidelines and estimates were correct by testing them. Still, they frequently made mistakes.