The Shaughnessy Report: Showing Some Constraint
Elementary, Mr. Watson: Rein in Your Design Constraints
Target Condition: Are Autorouters Friend or Foe?
Trotter Controls Utilizes Eco-Friendly Batch Cleaning from AAT
February 3, 2021 | Trotter ControlsEstimated reading time: 1 minute
Trotter Controls, a leading provider of product design, system integration, and repair services for the automation and aerial firefighting mission equipment industry, has partnered with Austin American Technology for their batch cleaning needs and purchased an AquaTHERM 9100.
Trotter Controls operates with a goal of having a very small carbon footprint, and needed to make sure no water goes to drain during batch cleaning. AAT built a custom water treatment cabinet that was delivered with the machine, allowing it to convert to a 100% closed loop unit-meaning zero discharge to drain. This eliminates any potential issues with EPA compliance due to the use of lead bearing solder paste commonly used in the aviation industry.
“The small footprint of the machine as well as its ability to completely clean our high reliability / high value boards make it an ideal addition for our high mix, low volume production needs,” commented Aurelio Munoz, Senior Production Test Engineer, Trotter Controls. “We expect the machine will pay for itself in labor savings as well as better quality due to reduced contamination on our PCB assemblies.”
Ideal for printed circuit boards, semiconductors, subassemblies and process tooling, the AquaTherm™ brings flexible, unparalleled cleaning performance to the batch process. Additionally the AquaTherm™ 9100 features a built-in chemistry metering pump, allowing the system to utilize a wide range of modern cleaning agents. With supplemental high temperature capability the system is capable to reduce chemical consumption while maintaining high product cleanliness and throughput.
Share on:
Suggested Items
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/15/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.