Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Fresh PCB Concepts: PCB Plating Process Overview
January 2022 Issue of Design007 Magazine Available Now
January 10, 2022 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
“Don’t let the smoke out!” That’s one of the PCB designer’s unspoken objectives, albeit a sarcastic one. The idea is that there’s a cloud of smoke inside each printed circuit board, and if you don’t design the board correctly, you’ll let all the smoke out. And in high-voltage boards, you might say that there’s a lot more smoke trapped inside, just waiting to get out and set your schedule back a few weeks.
In our recent surveys, readers mentioned high-voltage PCBs among the challenges that they’re facing as the automotive segment, electric vehicles in particular, demand higher voltages. So, in the January 2022 issue, we asked our contributors to share their thoughts on designing high-voltage PCBs.
Download your copy today on the virtual newsstand or subscribe here for delivery in your email inbox.
Share on:
Suggested Items
CACI Chairman, Michael A. Daniels, Receives Prestigious Lifetime Achievement Recognition from NACD
12/20/2024 | CACI International Inc.CACI International Inc announced that CACI Chairman of the Board of Directors Michael (Mike) A. Daniels was presented with the prestigious 2024 National Association of Corporate Directors (NACD) Directorship 100™ B. Kenneth West Lifetime Achievement Award at its annual gala in New York.
Aspocomp’s Shareholders’ Nomination Board’s proposals to the Annual General Meeting 2025
12/19/2024 | AspocompThe Shareholders’ Nomination Board of Aspocomp Group Plc submits the following proposals to the Annual General Meeting, planned to be held on April 29, 2025. The proposals will also be included in the Notice to the Annual General Meeting 2025 to be published at the later date.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Cadence Appoints Moshe Gavrielov to Board of Directors
12/13/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced the appointment of Moshe Gavrielov to its board of directors, effective January 1, 2025. Mr. Gavrielov currently serves as a member of the board of NXP Semiconductors N.V. and Taiwan Semiconductor Manufacturing Company Ltd., as chair of the board of Foretellix and SiMa.ai, and has previously held executive roles at several global technology companies.
Burkle's Marco Schaible Joins VDMA Photovoltaic Equipment Division’s Executive Board
12/13/2024 | Burkle AmericaThe Photovoltaic Production Equipment Department of the VDMA held regular elections at its board meeting on December 5 and confirmed the top management. Prof. Dr. Peter Fath, RCT Solutions GmbH, was re-elected as Chairman of the Board and Dr. Stefan Rinck, Singulus Technologies AG, was re-elected as Deputy Chairman.Burkle America is proud to announce that Marco Schaible, our Vice President of PV and Glass Solutions, has been confirmed as a member of the new Executive Board for the VDMA’s Photovoltaic Production Equipment Division. This appointment reflects Marco’s exceptional expertise and commitment to advancing innovation and competitiveness in the German-European solar machinery industry.