-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
DARPA Seeks to Transition Precision Optical Atomic Clocks from Laboratory to Warfighter
February 1, 2022 | DARPAEstimated reading time: 2 minutes
Synchronizing time in modern warfare – down to billionths and trillionths of a second – is critical for mission success. High-tech missiles, sensors, aircraft, ships, and artillery all rely on atomic clocks on GPS satellites for nanosecond timing accuracy. A timing error of just a few billionths of a second can translate to positioning being off by a meter or more. If GPS were jammed by an adversary, time synchronization would rapidly deteriorate and threaten military operations.
To address this scenario, DARPA has announced the Robust Optical Clock Network (ROCkN) program, which aims to create optical atomic clocks with low size, weight, and power (SWaP) that yield timing accuracy and holdover better than GPS atomic clocks and can be used outside a laboratory. ROCkN will leverage DARPA-funded research over the past couple decades that has led to lab demonstration of the world’s most precise optical atomic clocks.1 ROCkN clocks will not be as precise as the best lab optical clocks, but they will surpass current state-of-the-art atomic clocks in both precision and holdover while maintaining low SWaP in a robust package.
“The goal is to transition optical atomic clocks from elaborate laboratory configurations to small and robust versions that can operate outside the lab,” said Tatjana Curcic, program manager in DARPA’s Defense Sciences Office. “If we’re successful, these optical clocks would provide a 100x increase in precision, or decrease in timing error, over existing microwave atomic clocks, and demonstrate improved holdover of nanosecond timing precision from a few hours to a month. This program could create many of the critical technologies, components, and demonstrations leading to a potential future networked clock architecture.”
The program is divided into two technical areas: The first focuses on developing a robust, high-precision small portable optical clock. The second area focuses on building a larger, but still transportable, optical clock with unprecedented holdover performance.
In the first area, performers will be tasked to design a portable optical atomic clock that could fit on a fighter jet or satellite providing picosecond (trillionth of a second) accuracy for 100 seconds. The clock will need to withstand temperature, acceleration, and vibrational noise for use on board aircraft, vehicles, or satellites.
The second technical area calls for performers to develop an optical atomic clock in a transportable package that could fit on a Navy ship or in a field tent to provide GPS-equivalent, nanosecond precision for 30 days in the absence of GPS.
ROCkN is a four-year program consisting of two, two-year phases. In Phase 1, performers in both technical areas will develop a physics package to demonstrate the technology, and in Phase 2 performers will be tasked to develop fully operational clocks. At the end of the program, synchronization between stationary, mobile, and airborne clocks will be demonstrated with timing precision sufficient for 100 GHz distributed coherence.
Suggested Items
RENK, QinetiQ Announce Strategic Partnership in Advanced Mobility Technology
09/10/2024 | QinetiQQinetiQ and RENK Group AG, a leading supplier of military and civilian propulsion solutions have signed a strategic partnership agreement that will see the two companies jointly develop future mobility concepts for military land platforms in the weight class of 5 to 60 tons. The partnership will focus on advanced hybridisation concepts and uncrewed ground vehicles (UGVs).
Archer Delivers First Midnight Aircraft to The United States Air Force
08/16/2024 | BUSINESS WIREArcher Aviation Inc. announced it has delivered its first Midnight aircraft to the USAF to evaluate as part of its AFWERX Agility Prime contract valued at up to $142M..
MilDef to Deliver Rugged Displays to European Military Vehicle Manufacturer
08/14/2024 | CisionVia the acquisition of certain assets of Advanced Vision Technologies Ltd (AVT), MilDef has now been entrusted to deliver intelligent and rugged displays to key European land vehicle programmes.
CACI Awarded $319 Million Task Order to Provide Intelligence Systems Expertise to the U.S. Army
08/05/2024 | CAC, Inc.CACI International Inc announced that it has been awarded a five-year task order valued at up to $319 million to provide intelligence systems expertise to the U.S. Army, Communications-Electronics Command (CECOM), Software Engineering Center (SEC), Electronic Warfare and Sensors Directorate (IEWSD), Army Reprogramming Analysis Team-Program Office (ARAT-PO).
Airbus to Lead NATO Next Generation Rotorcraft Capability Concept Study
07/26/2024 | AirbusThe NATO Support and Procurement Agency (NSPA) has awarded a contract to Airbus Helicopters to lead a concept study in the frame of the Next Generation Rotorcraft Capability (NGRC) project under which the participants combine efforts to work on design, development and delivery of a medium multi-role helicopter.