-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
AltiumLive 2022: No Shortcuts to Disciplined Library Management
February 24, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 6 minutes
I recently met with Altium’s John Watson for a discussion about his AltiumLive presentation on coping with design challenges, particularly in library management. As John explains, with library management, there’s no substitute for sitting down and doing the hard work, particularly during times like these, with a supply chain that is erratic at best. He also discusses his new job at Palomar College, teaching basic and advanced design techniques to students who are often seeking the “easy way out” in PCB design.
Andy Shaughnessy: John, it’s been a long time. How are you?
John Watson: I’m doing great. Living the dream, as they say.
Shaughnessy: Speaking of which, your AltiumLive presentation, which is available online now, focuses on coping with design challenges. Why don’t you tell us a little bit about it? What are some ways that designers can cope with these challenges?
Watson: We have all been seeing the developing challenges. Some things have been really getting out of control, especially with parts procurement and things like that. This class will take a different approach to this.
When we look at design challenges, we want to look at the resources available to us to solve those problems and issues. Of course, we all know that everything begins and ends in our component libraries. We’ll start off by looking at the library structure a little bit, and then I’ll take a very deep dive into the makeup of a component. Then we’ll look at some specific challenges that designers are facing and discuss which resources in that component provide solutions for us. For example, if we had some issues with mechanical, we would be looking at the 3D step model, for example, inside the component itself.
And then we talk about some of the other challenges we’re having as designers, especially part procurement. I discuss good practices for handling part procurement, part shortages, and things like that—all based on the library and the resources available in the library itself.
Shaughnessy: Well, that does seem to jibe with what we’ve seen from our surveys lately. So many of the problems designers face come down to data, whether it was input badly or it was incorrect when they received it. And a lot of that is in the library.
Watson: Right. One of the points I bring out is that most of the challenges that we face are due to a lack of correct information in the library in the first place. If your part choices are not as selected, your procurement person’s going to say, “Hey, what are you doing?” This information is used throughout the printed circuit board design process and if it’s not there, it’s going to cause issues at the very forefront. I’m taking the next step, saying, “Okay, how do we identify the resource that we have to fix the problems we’re facing?” That’s something that’s going to be unique in that approach.
Shaughnessy: Why is this so important for PCB designers?
Watson: We had a theme running throughout the conference. In the technical portion, a lot of our talks focused on part procurement, part shortages, things like that. This is important because these are things in the real-world environment that they’re facing right now. And presenting a new method or approach is definitely going to help them streamline their design process right now and get attendees over some of these hurdles we’re facing. I don’t think I’ve ever seen challenges like some we’re facing right now. I’ve never seen anything like this in my entire career, and some of the challenges that I have seen before have not been at this level.
Shaughnessy: Well, it is a crazy time for the supply chain.
Watson: That’s a definite understatement, but I think we’re going to get through this. First off, it’s going to come down to us working differently than what we did in the past and utilizing all the resources. We have a lot of different tools in our toolbox to use, and it’s really important that we take a step back and reexamine the way we’ve been doing things. Maybe we need to make some changes. At least we need to maybe step it up a gear and see how we can better our design process right now.
Shaughnessy: Do you have any advice you would give to any young designers maybe coming in that are having to deal with more and more, all these different libraries?
Watson: This might be unusual, but my advice to them is don’t take the easy way out. There are going to be a lot of challenges to face. And a lot of times I find that young designers want to find the easy route. Sometimes there’s just not an easy way out. You have to go through the challenges and learn the lessons. I get these questions all the time, what’s an easy way of doing this or an easy way of doing that. Well, you know what? It’s the wrong question. You should be asking yourself, “What are the tools I need? What do I need to learn? Whatever challenges pop up, I’m going to face them.” The advice I give to young designers is to face those challenges head on, because on the other side of that challenge, you’re going to have a massive learning experience. And that’s where you begin to develop your skills as a designer, not by avoiding those challenges, but taking them head on and learning from them.
Shaughnessy: Right, that’s true. Funny, because there are classes every so often called “The Easy Way to Do This or That.”
Watson: I actually conclude my talk this year with just that subject. We’re living in an environment where the number of challenges is increasing, and they’re getting harder. The issues are getting more difficult, boards are becoming more difficult to design, and you’re not going to become a great designer by taking the easy path or the easy way out. There is no easy way or easy path here. You’ve got to put in the time, you’ve got to put in the effort, put in the study.
Shaughnessy: That’s where you–like you said–don’t take the easy way out. You find out all the theory behind what works and what doesn’t work.
Watson: Right. I’ve recently taken a teaching position, a professorship at Palomar College in San Marcos, teaching basic and advanced PCB design. I get this question from my students all the time: “Is there an easier way of doing this?” No. No, there’s not.
Shaughnessy: Closing thoughts?
Watson: AltiumLive is awesome. These presentations are available online right now, and you will be kicking yourself in the rear if you don’t take advantage of them.
Shaughnessy: Thanks a lot, John.
Watson: Thank you, Andy.
Watch John Watson's presentation "Coping with Design Challenges with an Intelligent Component Library" below.
Suggested Items
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.