-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Calumet is Bullish on Additive and Semi-Additive
March 15, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Calumet Electronics has been a domestic pioneer with additive and semi-additive electronics manufacturing processes. We recently asked Calumet’s Todd Brassard and Meredith LaBeau to discuss the state of this technology, which traditional processes that they might replace, and some of the challenges facing OEMs or PCB shops that are considering these options.
Barry Matties: We’re seeing more additive and semi-additive. Let’s start with what these technologies represent to Calumet.
Todd Brassard: I’m sure some of your readers will go a little crazy at our use of the word “additive.” In my mind, pure “additive” manufacturing is 3D-printed or deposition-based processes while “semi-additive,” in the context of circuit board substrates, involves a seed layer of copper (A-SAP™) or a very thin layer of copper foil (mSAP) with plated copper traces and features.
We understand the distinctions between terms additive and semi-additive; we do not use “additive” to necessarily describe a process, but rather as a proper noun to name the thing and contrast it against “subtractive” processes. For example, when working with Averatek’s A-SAP™ technology, the seed layer is so thin that it is removed with a simple micro-etch. To me, the process is so close to being purely additive, I name it an additive process.
Matties: Is it going to be a mandatory offering for most fabricators in the coming years? Or is this something that will still be limited in scope?
Meredith LaBeau: What is driving the need for additive manufacturing—and I use this term “additive” as Todd just described—is design size and complexity. Next generation electronics will be much smaller. This is easy to see just following the mobile device industry. An electronic interconnect manufacturer in the U.S. can only go so small with traditional subtractive manufacturing processes.
Another piece of this push toward additive technology is environmental. There will be many more conversations about the environmental impact of manufacturing processes, and these considerations will factor more heavily into contract awards. With traditional subtractive processes you’re removing copper, but with additive processes you’re mostly adding copper. I believe there's going to be a shift in design to reduce waste streams regardless of technology, as part of the wider ESG movement.
Todd Brassard: Yes, ESG: environmental and social governance.
Matties: Is that becoming more prevalent?
LaBeau: We are just starting to see environmental considerations seep into conversations and design considerations at our level.
Todd Brassard: We are seeing more environmental considerations flowing down from the DoD. The DoD wants to see transition to greener solutions. Calumet is learning the ropes of federal funding and we believe environmental considerations must be included in any submitted proposal. We’ve been seeing these types of requirements added to RFPs in the last few years. Personally, I believe this is a good thing. We should be paying attention to what we are doing to the planet; this is just common sense.
LaBeau: The additive and semi-additive movements are not just about miniaturization, but also system performance and integrity. Additive and semi-additive technologies provide for better copper trace and feature formation which improves signal integrity and shortens transmission lines, allowing faster bit rates and higher frequencies. For example, radar and communications systems achieve higher performance when trace walls are square and smooth. Combine the potential for feature formation with advanced materials and chemical processes and a wide array of possibilities emerge. As an example, Calumet can plate copper on transparent substrates; just imagine the applications, for example, in the augmented reality space.
To read this entire conversation, which appeared in the February 2022 issue of PCB007 Magazine, click here.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.