-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Designing in a Vacuum Q&A: Carl Schattke
May 11, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 3 minutes
Not long ago, I caught up with Carl Schattke, CEO of PCB Product Development LLC and a longtime PCB designer, for his thoughts on “designing in a vacuum.” As Carl points out, if you follow PCB design best practices, knowing the identity of your fabricator is not a “must-have.” He also offers some communication tips for discovering the information you do need, including one old-fashioned technique—just asking for it.
Andy Shaughnessy: Carl, how often do you design a board without knowing who is going to fabricate and/or assemble it?
Carl Schattke: It’s pretty often that the design will start and get completed, or nearly completed, without any board vendor involvement. This is far more common if it’s a standard stackup and a routine process.
For sequential lamination, rigid-flex and flex boards, it’s very rare to not involve the board vendor early on. Also, if there are multiple differential pair impedances on different layers, it’s much more likely a request to the board vendor will be made at the start of placement before routing commences.
Shaughnessy: Why do you think so many designers have no idea who is going to manufacture their boards?
Schattke: It’s nice to have this information, but it’s not a must-have. By following general rules for volume manufacturing, you should be able to get the board built by the vast majority of UL-listed board shops. EEs and purchasing people are typically very busy and they don’t have time to do tasks until they need to be done. The can that can be kicked down the road usually is.
It’s up to the PCB designer to request a stackup with impedance values and HDI rules if the board is higher up on the high-tech scale. None of us want to waste time. If the board is a common low-risk build, the build and rework risk is low if you have incomplete data about who will build the board. When we start using exotic materials and sequential laminations with varied copper weights and high layer counts, it would be foolish not to involve the PCB vendor on the design start.
Dense designs require going right up to the edge of the rules without breaking them. To do that, you need to review the process and your expectations with the vendor to make sure they can build what you design. To do otherwise could put hundreds of hours of work at risk for rework, and no one wants that.
Shaughnessy: What other missing information or data do you find yourself having to “design around”?
Schattke: Where do we start with this question? I would say that the need to get something out the door ASAP drives many designs to start in a state of partial completion. The primary risk of starting PCB layout too early is that the optimal result may not be obtained. Common missing items include incomplete schematics, or incomplete sections of the schematics, and missing current information needed for calculating trace widths.
Other missing information includes voltage clearance rules from one class of nets to another, and missing nomenclature requirements like part numbers, assembly numbers, test marking, and any other special text. Board finish and copper weight are often not provided, and the designer will decide what is best then. The environment the product will be used in is very important for the board design, and this is often missing. Mechanical outline drawings are often incomplete and follow-up details have to be requested.
To read this entire conversation, which appeared in the May 2022 issue of Design007 Magazine, click here.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.