Standard of Excellence: Building Excellence From the Inside Out
Powering the Future: Why True Ceramic Circuits Are Not Just ‘Better PCBs’
Global Sourcing Spotlight: The Global Quality Gap—Why Consistency Wins the Contract
The standard method of evaluating conformal coatings is to apply coatings to the actual hardware and determine the meantime to failure. This method is inconvenient and slow, often taking many months, making it an impractical way of testing.
The recently completed Phase 2 of the Conformal Coating Evaluation for Improved Environmental Protection project compared the results from three testing environments that provided much shorter testing times using Cu and Ag thin film metrologies. The project team tested three commonly available conformal coatings using flowers-of-sulfur (FOS) and mixed-flowing gas (MFG) environments as well as iodine vapor tests (IVT). The FoS and the MFG environments were proven to be quick tests for quantitatively characterizing conformal coatings, while the IVT can qualitatively characterize conformal coatings in 30-60 minutes. This allows manufacturers to significantly accelerate product development and evaluation cycle times.
To learn about the experiments and test results from Phase 2, please join this webinar. The project team will also share what they learned from the study of using Terahertz as a non-destructive technique for coating thickness measurement and will discuss potential future work.
This webinar is open to the industry. Two sessions (with the same content) are scheduled; advance registration is required, please visit iNEMI's website for more details.
Session 1 (Americas & Europe)
Wednesday, May 25, 2022.
8:00-9:00 a.m. EDT (Americas)
2:00-3:00 p.m. CET (Europe)
8:00-9:00 p.m. CST (China)
Session 2 (APAC)
Thursday, June 9, 2022
8:00-9:00 a.m. CST (China)
8:00-9:00 p.m. EDT (Americas) on June 8
