-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
EIPC Summer Conference 2022: Day 2 Review
June 29, 2022 | Pete Starkey, I-Connect007Estimated reading time: 11 minutes
The bonding of PTFE multilayers has traditionally presented many challenges. Helmut Kroener, senior marketing director for PWB materials at Showa Denko Materials, introduced a new low-loss thermoset bonding film for PTFE HDI and any-layer multilayer.
With the rapidly increasing growth and diversity of applications operating at radio frequencies, there is an ongoing need for high-performance substrates with good dielectric and loss properties. Of all the low-loss materials PTFE, although expensive, offers the lowest transmission-loss, and multilayer substrates based on PTFE has excellent low-dielectric properties. But its high melting point makes multilayer lamination difficult, especially in hybrid constructions where the other component materials can’t withstand the bonding temperature.
The low-loss bonding film described by Kroener offered the opportunity to build multilayer constructions at a processing temperature of 200°C, offering a lower-cost higher-speed solution. Functional groups in the thermosetting material interacted strongly with the PTFE material, and it was also capable of excellent adhesion to low-profile copper foil, offering further improvements in transmission loss.
The film was unreinforced by glass cloth but contained an inorganic filler, so its properties were isotropic, with Dk of 3.0 and Df of 0.0023. It was supplied in widths up to 520 mm, in thicknesses of 25, 50, or 65 microns, on a 50 micron polyester carrier film. Alternatively, it was available as a resin-coated copper foil in the same dielectric thicknesses, on 12 or 18 micron copper. The resin had low melt viscosity and good gap-filling ability. Once cured, it could be laser-drilled for microvia formation or drilled mechanically, and plated using normal PTFE processes.
And now for something completely different. The final presentation of the EIPC Summer Conference was a non-chemical process for making roll-to-roll flexible circuits. Dry phase patterning was described by Tommy Höglund, sales and marketing manager with DP Patterning in Sweden.
The process he described could take flexible circuit manufacturing out of the PCB shop and into the EMS shop, feeding direct to the pick-and-place line.
The tooling was a laser-engraved metal cylinder, set-up time five minutes, processing time about one hour, to produce a roller with the required circuit pattern effectively engraved as a sharply-defined negative image and the insulating areas remaining as part of the original surface.
The production line, 18 feet long, had a roll-to-roll transport system for single-sided flexible laminate and the imaging mechanism rotated the prepared tool, known as a cliché, at web speed. This was running at very close clearance against a high-speed rotating cylindrical cutter, with the clearance corresponding to the thickness of the base film of flexible laminate, typically polyester in the range 35 to 75 microns.
The material was fed under tension around the cliché and where it passed through the nip between cliché and cutter. The cladding-metal layer, typically copper or aluminium, was milled away in areas corresponding to the original surface of the cliché, to leave the required circuit. The system appeared to work remarkably well in the production of antennas, heaters, RFID circuits, and conventional flexible circuits with 300 micron lines and 200 micron spaces on 18 micron copper.
Sustainability benefits of dry phase patterning were listed as low carbon footprint, low energy consumption, no chemicals, no water usage and recyclable residuals. Target market segments were communication, automotive, LED lightning, and heaters in general.
Kirsten and Carol
As this conference came to a close, there was unanimous consensus on the success of the event, and universal praise for the efforts of Kirsten Smit-Westenberg, Tarja Rapala-Virtanen, and Carol Pelzers in bringing it all together.
With grateful thanks to Alun Morgan for the excellent photographs.
Pete Starkey is a technical editor for I-Connect007.
Page 3 of 3Suggested Items
Winners of IPC Hand Soldering and Rework Competition Vietnam 2024 Announced
09/19/2024 | IPCIn conjunction with NEPCON Vietnam 2024, IPC hosted its popular IPC Hand Soldering and Rework Competition in Hanoi, Vietnam, September 11-13. Thirty-nine competitors from 16 electronics companies and one university in Vietnam vied for top honors.
Understanding Cleaning Challenges for Automated Solder Paste Dispensing
09/18/2024 | Debbie Carboni, KYZENIn today’s rapidly evolving electronics manufacturing landscape, staying abreast of innovative technologies is crucial. As solder paste and substrate materials continually evolve and become more complex, optimizing production methods with the latest technology ensures performance and quality while reducing operational costs.
Successful Rehm Technology Days 2024 – Where the Future Meets Technology
09/17/2024 | Rehm Thermal SystemsTraditionally, the Rehm Technology Days offer a valuable opportunity for knowledge exchange, networking and discussion. Once again this year, numerous customers, partner companies, press representatives and employees from the worldwide locations met at the company headquarters in Blaubeuren-Seissen.
Circuit Technology Center Announces Expanded Tinning Services Capacity
09/16/2024 | Circuit Technology CenterCircuit Technology Center announces it has expanded its electronic component tinning services capacity. Four (4) Hentec-Odyssey 1325 robotic hot solder dip machines are in full operation to meet the increasing demand from the defense and high-reliability customer base that requires component tinning services for tin whisker mitigation, gold mitigation, and lead re-conditioning.
The Knowledge Base: The Pivotal Role of Solder Paste
09/16/2024 | Mike Konrad -- Column: The Knowledge BaseIn the complex world of electronics manufacturing, the humble solder paste plays a pivotal role. Often overshadowed by more conspicuous electronics assembly equipment and materials, this blend of powdered metal and flux is the unsung hero that binds the electronic circuits together. But beyond its adhesive and conductive properties, the selection of the right solder paste is crucial for ensuring the long-term reliability of electronic devices.