Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
Keysight Solutions Selected by Flexium to Deliver New Liquid Crystal Polymer Transceiver Applications
August 24, 2022 | Keysight Technologies, Inc.Estimated reading time: 1 minute
Keysight Technologies, Inc., a leading technology company that delivers advanced design and validation solutions to help accelerate innovation to connect and secure the world, and Flexium Interconnect, Inc., a leading FPC (Flexible Printed Circuit Board) and LCP (Liquid Crystal Polymer) module vendor, are collaborating to improve millimeter wave modules and material test accuracy and efficiency.
The rise of 5G Frequency Range 2 (FR2), upcoming 6G, autonomous vehicle and emerging E-band applications are increasing the demand for millimeter wave, the band of spectrum with wavelengths between 10 millimeters (30 GHz) and 1 millimeter (300 GHz). High frequency and material characterization are critical to enabling low latency transmission and improving signal/power integrity. However, there remain challenges in measuring dielectric properties, which provide critical design parameters for many electronics applications in various frequencies, fixtures and methodologies.
"We’re excited to collaborate with Flexium on millimeter wave material measurements for next generation communication technologies, as engineers characterize, understand, integrate and accelerate the market adoption of high-frequency LCP antenna modules," said Joe Rickert, vice president of high frequency measurement R&D at Keysight Technologies.
Accurate test and system validation is vital while developing LCP antenna modules. Flexium adopted Keysight's N5227B PNA Microwave Network Analyzer, upconverters, S93007B Automatic Fixture Removal (AFR) and N1501AE11 Balanced Type Circular Disk Resonator (BCDR) to precisely characterize the mmWave sample circuit.
In addition, Flexium leveraged Keysight’s N1500A Materials Measurement Suite to perform accurate and continuous measurement of dielectric constant (Dk) and dissipation factor (Df) at desired frequencies, helping designers to automate complex permittivity and permeability measurements then quickly match corresponding parameters for end products. Flexium also used the company’s Metasiden mmWave antenna measurement system, integrated with Keysight's M9484C VXG Vector Signal Generator and N9042B UXA Signal Analyzer, to accurately measure directional antenna pattern, efficiency of radiation and validate module function to address customer needs.
"Flexium adopted Keysight's PNA Network Analyzer Family for FPC measurement, which significantly reduced human error and improved test efficiencies," said Ming-Chi Cheng, president of Flexium. "We are glad to work with Keysight as long-term partner. This joint effort will accelerate advanced designs in high-frequency, thinning, and multi-layer LCP antenna modules, as well as future opportunities of B5G/6G, LEO and autonomous vehicles."
Share on:
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
06/24/2025 | Dennis Fritz -- Column: Defense Speak InterpretedWhen I first published my Defense Speaks Interpreted column in January 2019 on the Defense Advanced Research Projects Agency (DARPA ERI), the agency advocated for an expanded Defense emphasis on closing the growing technology gap in microelectronics. The emphasis was on “resurgence.”
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/13/2025 | Marcy LaRont, I-Connect007Today is Friday the 13th, and in much of Western folklore, this is a day when bad luck is lurking. But while Friday the 13th may top Western superstition charts, the global calendar is sprinkled with its own unlucky legends. In Spain and Greece, the bad juju lands on Tuesday the 13th—a day linked to Mars, the god of war, and naturally, chaos. In Italy, it’s Friday the 17th that is feared, thanks to the Roman numeral XVII, which can be rearranged to spell VIXI—Latin for “I have lived” (a poetic way of saying you’re dead).
TTCI Celebrates Melanie Rutkauskas’ 10-Year Anniversary and Her Leadership of New Training Division
06/12/2025 | TTCIThe Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to celebrate Melanie Rutkauskas on her 10-year anniversary with the company.
Bridging the Knowledge Gap in Test: A Conversation with Bert Horner
06/11/2025 | Barry Matties, I-Connect007Bert Horner is a seasoned industry veteran and co-creator of The Test Connection, Inc. (TTCI), a test and inspection company spanning over 45 years. In this candid conversation, Bert reflects on the challenges our industry faces with the retirement of career professionals and the subsequent loss of critical tribal knowledge. As he unveils The Training Connection’s innovative training initiatives, Bert emphasizes the importance of evolving educational programs that align with industry needs, particularly in design for test (DFT), and sheds light on strategies being implemented to foster the next generation of engineers.