Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Register Now for Eric Bogatin’s Transmission Lines 101 Sept. 29-30
September 16, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Professor Eric Bogatin of the University of Colorado-Boulder is doing a rare live class, online, covering transmission line fundamentals. The 1.5-day Transmission Lines 101 will take place September 29-30. The tagline for the class is “Never be intimidated by transmission lines again!”
Eric is known for taking complicated signal integrity issues and breaking them down into manageable bites that everyone can understand. The course will help PCB designers and design engineers understand how signals propagate on transmission lines, how to design transmission lines using a 2D field solver, and how to interpret TDR measurements. This will be applied to both single-ended and differential transmission lines.
This course is for any engineer or technician who wants to understand what characteristic impedance really means, how to think about signals on transmission lines, and how to effectively use commercial tools to design transmission lines and interpret TDR measurements. If your job involves transmission lines, this course will bring you from zero to mastering transmission lines.
The content is presented at a level suitable for mechanical engineers, test engineers, manufacturing engineers, materials engineers, and anyone who designs circuit boards for data rates above about 10 Mbps.
The class takes place on Thursday afternoon, September 29, and all day Friday, September 30. For more information, or to register, click here.
Share on:
Suggested Items
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
07/08/2025 | Prashant Patel -- Column: Facing the FutureThere has always been a subtle but significant divide between those who design and those who build printed circuit boards. It’s not a hostile gap, but it is a real one, and in today’s high-speed, high-complexity, high-stakes environment, that gap is costing us more than time and yield. It’s costing us innovation.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Connect the Dots: The Future of PCB Design and Manufacturing
07/02/2025 | Matt Stevenson -- Column: Connect the DotsFor some time, I have been discussing the increasing complexity of PCBs and how designers can address the constantly evolving design requirements associated with them. My book, "The Printed Circuit Designer’s Guide to… Designing for Reality," details best practices for creating manufacturable boards in a modern production environment.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.