-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A New Sourcing Paradigm
September 20, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical.
But as we learned in a conversation with I-Connect007 columnist Kelly Dack, an EPTAC design instructor and PCB design team leader at an assembly provider in the Pacific Northwest, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”
Here, Kelly discusses some timely sourcing ideas, why he believes industrial engineers should be involved in “right-sizing” the PCB, and why sourcing efforts must also focus on recruiting—or creating—PCB designers.
Andy Shaughnessy: Kelly, you’ve been involved with DFA issues for years. Why don’t you talk about some of the challenges you see with sourcing?
Kelly Dack: Sure. The problems we see are projects that begin as traditional projects. We have customers who come to us much like on “Shark Tank.” There’s an idea, some seed research and development has been done, the results are favorable, and they want to take the product to production. At that point, we evaluate the product to determine its feasibility for meeting the capabilities of our assembly lines. Everything is fine, just like it always is—until it’s not. That’s because with today’s rusty, knotted supply chain we are not able to source certain components. That one little thing can slow down or stop the entire project. We limp along until we can either change the design, modify it so that we can find an alternative component, or redesign the circuit so that we can use alternate components that will do the same thing.
Happy Holden: You understand design for manufacturing. Now we’re not talking about process capability; we’re talking about part availability, but that’s still manufacturing.
Dack: That is still manufacturing and sourcing, and that plays into it, Happy. A product can be totally 100% designed and look very good from a production standpoint and from a DFM standpoint. But now, when a part suddenly becomes unavailable, it could require another part to be designed in, which may not be form-fit and functionally the same, but it could still work. But now designing in this part has to be done properly so that design for manufacturability is considered. How many parts do you have to nudge? What’s the domino effect if we do manage to fit this part in?
Holden: So, we have to make a change in design so that the information is known up front and it’s not a do-over?
Dack: The problem we’re finding is that everybody is using the smaller parts, and the large parts are left over. So, if you want to find an equivalent functional part, chances are all the tiny ones have all been gobbled up, and you must be willing to buy the larger-scale parts. But how do you fit the larger-scale parts into your layout?
Shaughnessy: There are those dominoes, right?
Dack: Right. Let’s take a step back. During the shrinkage era in the ‘90s, when we were working on iterating boards down as small as they could be, I coined the term “practical packaging density plus.” The idea is that we determine an appropriate packaging density, and then once you get that dialed in, what’s wrong with adding just a little more for future design purposes or manufacturing purposes? Why do we constantly design to the minimum, tightest density?
Shaughnessy: Are you talking about adding more real estate?
Dack: It can be real estate. Packaging density has to do with the amount of real estate on a given PCB vs. the components and everything else, and all the geometries involved with the components.
To read this entire conversation, which appeared in the September 2022 issue of Design007 Magazine, click here.
Suggested Items
Quantic Electronics Announces Acquisition of M Wave Design
05/20/2024 | Quantic ElectronicsQuantic® Electronics, a portfolio company of Arcline Investment Management, announced the acquisition of M Wave Design, a leading supplier of ferrite-based RF and Microwave components for aerospace, defense, and quantum computing applications.
Textron Systems Collaborates with Kodiak to Develop Uncrewed Military Vehicle
05/20/2024 | PRNewswireTextron Systems Corporation, a Textron Inc. company, a leading developer of crewed and uncrewed military ground vehicles, and Kodiak Robotics, Inc., a leading self-driving technology developer for the trucking and defense markets, announced that they are collaborating to develop an autonomous military ground vehicle specifically designed for driverless operations.
Spring 2024 Santa Clara County Flexfactor Finals Held at Nextflex
05/20/2024 | NextFlexNextFlex hosts this semester’s FlexFactor. Four teams of high school students competed by pitching their inventive products to a panel of esteemed judges composed of Robert de Neve, General Partner & Chief Strategist General Partner & Chief Strategist at NextPhase Ventures; Christine Holly Ngo, VP of Operations and Business Development at Silicon Valley Elite Manufacturing, Inc; and Jackson Rambough, FHE Design and Process Engineer at NextFlex.
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.