Elementary Mr. Watson: Ensuring a Smooth Handoff From PCB Design to Fabrication
The Shaughnessy Report: Breaking Down the Language Barrier
Connect the Dots: Designing for Reality—Routing, Final Fab, and QC
Real Time with... IPC APEX EXPO 2023: Latest Trends in High-end Lamination Processes
February 9, 2023 | Real Time with...IPC APEX EXPOEstimated reading time: Less than a minute
Ralph Jacobo of all4-PCB discusses consumable products for high-end lamination processes with Pete Starkey. Ralph talks about reusable press pads and release films capable of the high temperatures associated with the bonding of high-frequency materials.
If you were unable to attend IPC APEX EXPO 2023, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.
Watch this interview below or click here to view on our Real Time with... IPC APEX EXPO show page.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/14/2025 | Nolan Johnson, I-Connect007Inside the industry, it feels like we’re getting ready for a big party holiday, and I’m feeling the whole Mardi Gras vibe. This weekend, IPC APEX EXPO kicks off with standards development committees and the Technical Conference before the Expo starts on March 18. We’ll be sneaking out of our network of evil lairs scattered around North America and convening at the I-Connect007 booth in the middle of the Anaheim Convention Center. Be sure to stop by and say hello.
IPC Hall of Fame Spotlight Series: Highlighting Denny Fritz
03/13/2025 | Dan Feinberg, I-Connect007This month, the Hall of Fame spotlight features Denny Fritz, a long-time friend and associate of mine. Denny first got involved with IPC in 1978 while working with MacDermid. His first efforts were with the various board fabrication committees, something he believes helped lead to his eventual Hall of Fame award.
IPC Asia’s Talent Development Program Opens Pathways to a More Qualified Workforce
03/14/2025 | Evelyn Cui, IPC AsiaIn Asia, the contradiction between the rapid development of the electronics manufacturing industry and the shortage of talent is particularly evident. The existing talent pool cannot fully meet the market's demand for highly skilled professionals. According to feedback from industry companies, there is an urgent need for professionals with knowledge of IPC standards and practical skills in electronics. However, the reality is that most academic courses are disconnected from the actual needs of the industry, leading to disappointing results when companies recruit from universities and schools.
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
IPC Releases Latest List of Standards and Revisions
03/12/2025 | IPCEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q1 2025.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in