-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Issues February Economic Outlook Report: Economic Data Provides a Mixed View of the Economy
March 2, 2023 | IPCEstimated reading time: 1 minute

Economic data over the last month is providing a mixed view of the economy per IPC’s February Economic Outlook report.
“On one hand, economic fundamentals continue to slow,” said Shawn DuBravac, IPC chief economist. “However, despite aggregate softness, certain segments continue to do well. For example, the defense and space equipment sector hit another new high in January, aerospace is up significantly from pre-pandemic levels and other sectors key to the electronics industry are holding up well.”
The report also shows that manufacturing sectors in Europe, the U.S., and China are all signaling contraction according to their respective PMI indexes, but in China and Europe at least, things are looking less bad this month. Despite signs of slowing demand, manufacturers continue to hire. “The broader economy added more than 500,000 new jobs, a shocking number in the midst of what many believe is the start of a recession,” added DuBravac.
Additional data in report show:
- U.S. manufacturing sentiment contracted for a third consecutive month, falling from 48.4 to 47.4 in January.
- U.S. industrial production was unchanged in January, but was noticeably weaker than the expected 0.5 percent increase. The manufacturing sector improved 1 percent in January, but prior months were revised downward leaving the headline index lower than previously believed. Industrial production has likely peaked, despite January’s rise.
- The S&P Global Eurozone Manufacturing PMI moved higher in January, rising from 47.8 to 48.8. The index hit a five month high, but remains in contractionary territory.
- EU electronics manufacturing output fell in December after a one month increase in November. Output declined 1.4 percent (month-on-month) and is down 0.9 percent over the last year.
- Despite indications that the global economy continues to slow, economists have marginally raised forecasts for economic growth in the U.S., Europe, and China for 2023.
View full report. For more information on IPC’s industry intelligence program including new reports, visit: www.ipc.org/advocacy/industry-intelligence.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Fabrinet Announces Retirement of Founder and Chairman Tom Mitchell After 25 Years of Visionary Leadership
10/20/2025 | FabrinetFabrinet, a leading provider of advanced optical packaging and precision optical, electro-mechanical and electronic manufacturing services to original equipment manufacturers of complex products, announced the retirement of company founder and Chairman, David T. (Tom) Mitchell, after 25 years of visionary leadership.
Marcy’s Musings: The Legislative Outlook—Helping or Hurting?
10/20/2025 | Marcy LaRont -- Column: Marcy's MusingsJust before we were ready to publish our October issue of PCB007 Magazine, some breaking news from the White House, unfortunately (but perfectly) parlayed into why the topic of this month’s issue has been so important to cover in great depth.
EMS Solutions Expands Workforce to Meet Rising Demand for U.S.-Based Electronics Manufacturing
10/17/2025 | EMS SolutionsEMS Solutions, a premier regional provider of Electronics Manufacturing Services (EMS), has announced several new hires across key departments as the company continues to grow its capabilities and meet increasing customer demand.
Jabil Announces Board Transitions
10/17/2025 | JabilJabil Inc. announced that Executive Chairman of the Board of Directors Mark T. Mondello and Directors Kathleen A. Walters and Jamie Siminoff will not seek re-election at Jabil’s Annual Meeting of Stockholders in January 2026.
StenTech Strengthens Precision Parts Platform with AME Acquisition
10/17/2025 | StenTechStenTech, North America’s leading provider of SMT printing solutions and precision manufacturing, has announced the acquisition of Advanced Metal Etching, Inc. (AME), a recognized specialist in chemically etched and laser cut precision parts.