Connect the Dots: How to Avoid Five Common Causes of Board Failure
Fresh PCB Concepts: Designing for Success at the Rigid-flex Transition Area 
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
Lean vs. TQM vs. Six Sigma
August 2, 2023 | Steve Williams, The Right Approach Consulting LLCEstimated reading time: 1 minute
Introduction
Lean, Total Quality Management (TQM), and Six Sigma are three popular methodologies used in business and manufacturing sectors to improve processes, increase efficiency, and reduce waste. While they share some similarities, each approach has its unique focus and tools. Here's a comparison of Lean, TQM, and Six Sigma.
The Founding Fathers
Companies like Toyota are often touted (with good reason) as the gold standard for quality system models. Toyota’s TPS (Toyota Production System) has been highly publicized and has gained increasing acceptance in American manufacturing operations over the last decade or so. What has not been highly publicized is the fact that many of these concepts originated in America, and quality pioneers like W. Edwards Deming had to take their show on the road to Japan only after being rejected by the leaders of American industry. The contributions of such legends as Dr. Deming, Dr. Joseph Juran, Philip Crosby, Dr. Kaoru Ishikawa, Dr. Walter Shewhart, and Shigeo Shingo had such an impact on the world that they truly are the Founding Fathers of modern quality.
“We strive to decide our own fate. We act with self-reliance, trusting in our own abilities. We accept responsibility for our conduct and for maintaining and improving the skills that enable us to produce added value.”
–Excerpt from Toyota Motor Corporation’s internal document, “Toyota Way”
Lean
Lean is a methodology and philosophy that originated from the Toyota Production System (TPS) and is widely used in various industries for process improvement and waste reduction. The core principle of Lean is to maximize value for customers by minimizing or eliminating non-value-added activities or waste. The primary focus of Lean is on creating flow and eliminating waste throughout the entire value stream, from the beginning of a process to its end. Waste, also known as "Muda" in Lean terminology, refers to any activity or process step that does not add value from the customer's perspective. Figure 1 illustrates the eight types of wastes identified in Lean Manufacturing.
To read this entire article, which appeared in the July 2023 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
U.S. Army Begins Fielding BAE Systems’ Mission-critical Software-defined Radios Across Rotary-wing Aviation Fleet
09/08/2025 | BAE SystemsBAE Systems’ AN/ARC-231A Multi-mode Aviation Radio Set (MARS) has completed initial installation and is operationally ready for use today on select U.S. Army rotary-wing aircraft.
AV Delivers First Two Multi-Purpose High Energy Laser Systems to U.S. Army
09/04/2025 | BUSINESS WIREAeroVironment, Inc. (AV) announced the successful delivery of the first two mobile counter-unmanned aircraft system (C-UAS) prototype Laser Weapon System (LWS) to the U.S. Army Rapid Capabilities and Critical Technologies Office (RCCTO) as part of the first increment of the Army Multi-Purpose High Energy Laser (AMP-HEL) prototyping effort.
New Podcast Episode Drop: MKS’ Atotech’s Role in Optimize the Interconnect
09/08/2025 | I-Connect007In this episode of On the Line With…, host Nolan Johnson sits down with Patrick Brooks, MKS' Atotech's Global Product Director, EL Systems, to discuss the critical role that wet processes play alongside laser systems in advancing the Optimize the InterconnectSM initiative. Brooks points to Bondfilm as a key example—a specialized coating that enables CO₂ lasers to ablate more effectively than ever before.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.